【摘 要】
：
In the enzymatic membrane reactor for separating casein hydrolysate, backflushing technology has been used to decrease the fouling of the membrane. Predication
【机 构】
：
Chemical Engineering Research Center
【基金项目】
：
the National Natural Science Foundation of China;
论文部分内容阅读
In the enzymatic membrane reactor for separating casein hydrolysate, backflushing technology has been used to decrease the fouling of the membrane. Predication of the backflushing efficiency poses a complex non-linear problem as the system integrates enzymatic hydrolysis, membrane separation and periodic backflushing together.In this paper an alternative artificial neural network approach is developed to predict the backflushing efficiency as a function of duration and interval. A contour plot of backflushing performance is presented to model these effects, and the backflushing conditions have been optimized as duration of 10s and interval of 10min using this neural network. Also, simple neural networks are established to predict the time evolution of flux before and after backflushing. The results predicted by the models are in good agreement with the experimental data, and the average deviations for all the cases are well within ±5%. The neural network approach is found to be capable of modeling the backflushing with confidence.
其他文献
A series of Co/Si/(Co/Cu/Co) multilayers and Co/Si/Co sandwiches were prepared by high vacuum electron-beam evaporation. It was found that a Si spacer (≥0.9nm)
Distributed inverted index technology is used in many peer-to-peer (P2P) systems to help find rapidly document in -set search system for peer-to-peer networkswh
Datapath accounts for a considerable part of power consumption in VLSI circuit design. This paper presents a method for physical implementation of datapath to a
The conjugation of semi-solid process technique and casting-rolling technique applied to produce the magnesium strips was studied. The semi-solid slurry hasbeen
By adopting an equivalent geometry model of machining process and considering thermo-plastic properties of the work material, a finite element method(FEM) to st
Nanostructured (NS) W-Cu composite powder was prepared by mechanical alloying (MA), and nanostructured bulk of W-Cu contact material was fabricated by hot press
In order to evaluate the degree and severity of Al-Mg-Mn-Sc-Zr alloy in exfoliation corrosion(EXCO) solution quickly and nondestructively, electrochemical imped
The TiB2 dispersion-reinforced copper-matrix composite used as electrode material in resistance spot welding of zinc coated steels was studied. The service life
Layered LiNi1/3Co1/3Mn1/3O2 materials were synthesized using a nickel-cobalt-manganese carbonate precursor obtained by chemical co-precipitation. The [Ni1/3Co1/
YLiF4: Er3 + was synthesized by hydrothermal method. Concentration of Er3 + is changed from 0 to 5 %. The absorption of Er3+ in all samples from 200 to 1200 nm