Adsorption of Au(Ⅲ) ions on xanthated crosslinked chitosan resin in hydrochloric acid medium

来源 :稀有金属(英文版) | 被引量 : 0次 | 上传用户:MAGICDHJ
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Xanthated crosslinked chitosan (XCCS) resin prepared under microwave irradiation were used for adsorbing Au(Ⅲ) ions in hydrochloric acid medium.The influence of pH and temperature on the adsorption capacity of XCCS was investigated.The original XCCS and the loaded XCCS were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD),respectively.The results indicate that the XCCS has ability to adsorb Au(Ⅲ) ions and the maximum adsorption capacity of Au(Ⅲ) ions on XCCS is observed at pH 1 and 20 ℃.The data of batch adsorption tests are fitted to kinetic models and isotherm models,respectively.The kinetics of adsorption process is found to follow pseudo-second-order kinetic rate model,and equilibrium data agree very well with the Langmuir model.Thermodynamic calculation of the Au(Ⅲ) ions adsorption process indicates that the adsorption process is spontaneous and endothermic.
其他文献
在淤泥层中,顶管顶进施工过程对上覆土体和邻近管线的影响较大,合理调节相关施工参数对控制土体扰动具有重要意义.本文以深圳固戍污水净化厂二期工程配水管项目为例,通过有限
γ'+ β Binary-phase Ni-Al coatings were prepared on second-generation single-crystal superalloy René N5 (N5) substrates by electron beam physical vapor deposi
NiCoCrAlY is usually used as the material to bond-coat in thermal barrier coating systems under high temperatures.Using NiCoCrAlY and adding different amounts o
为了固化某磷矿分解车间产生的含铅镉离子工业固废中的重金属离子,本文以该工业固废为研究对象,通过室内试验从6种固化剂中选定最优固化剂,研究在不同掺量、试样含水率和粒径
There is an urgent demand to explore new approaches of improving the electric breakdown strength of the ferroelectric thin-film capacitor without the degradatio
A low-density single crystal (LDS) alloy with the composition of high Mo content was designed.The extra 1.5 wt% Mo was added in the Alloy A with the composition
Dense nano-grained Ni0.7Mn2.3O4 negative temperature coefficient (NTC) thermistors were fabricated by a novel two-step sintering approach that combines rapid si