高效连续Nd:LuVO4- BiBO深蓝激光器

来源 :红外与激光工程 | 被引量 : 0次 | 上传用户:sb0077
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Nd:LuVO4晶体因具有相比于Nd:YVO4和 Nd:GdVO4晶体更大的吸收和发射截面而受到广泛关注。一种高效的泵浦方式因此而产生:将Nd3+离子直接泵浦到4F3/2激光上能级来改善激光器参数,不仅可以减小激光器的阈值,提高激光器的斜效率,并且可以降低非辐射跃迁过程中所产生的热量。利用888 nm激光二极管直接泵浦Nd:LuVO4晶体,实现了准三能级Nd:LuVO4激光器。当入射泵浦功率为18.6 W时,916 nm 的输出功率为2.5 W,激光器的阈值功率为4.7 W,相应的斜效率为17.8%。入射泵浦功率不变的情况下,获得的最大蓝光输出功率为743 mW。蓝光输出功率的稳定性高于3%。光束质量M2的值为1.12。“,”Nd:LuVO4, has attracted much attention because its larger absorption and emission cross sections than Nd:YVO4 and Nd:GdVO4. A more efficient pumping method was presented and researched, which was to pump the Nd3+ ions directly into the 4F3/2 upper lasing level to improve the laser parameters such as decreasing the threshold and increasing the slope efficiency and reduce the amount of heat generated by the nonradiative processes. In this paper, the report a quasi-three-level Nd:LuVO4 laser which is directly pumped by a laser diode at 888 nm. Achieved an output power of 2.5 W at 916 nm for an incident pump power of 18.6 W. The incident pump power at threshold of laser oscillation was 4.7 W, corresponding to the slope efficiency with respect to the incident pump power was 17.8%. For the same incident pump power, a maximum blue output power was 743 mW. The stability of the blue output power was better than 3%. The beam quality M2 value is 1.12.
其他文献
“尽管比赛地从西部小城特里尔搬到了诺费尔登,尽管大部分赛道已和往年不同,但熟悉的乡间小路、葱郁的葡萄园和拥趸的人群还在。德国站依然还是那个不变的‘配方’,不变的味
期刊
To label embryonic stem (ES) cells with enhanced green fluorescent protein (EGF P) on the hypoxanthineguanine phosphoribosyl transferase (HPRT) gene locus for t
阐明港口煤炭货源计划手工管理的弊端,指出计算机管理势在必行.设计的系统由年度计划、月份计划、基本信息、辅助功能等四个子系统组成,给出了模块结构图,并对各个模块实现的
留置气泡技术在本科基础护理教材上的解释为用注射器抽吸适量药液后,再吸入0.2~0.3ml的空气,注射时气泡在上,当全部药液注入后,再注入空气。该方法可使针头部位的药液全部注
尽管有关部门和人员信誓旦旦要采取预防措施,且各种安全保障也被确立,但无论从哪个角度看,2002年11月12日联合国濒危动植物种国际贸易公约缔约国大会允许非洲几个国家出售象
分析了目前世界油船运输市场,以及世界油船的保有量、造船市场情况、二手船交易量、船舶拆解量和造船成本,进而对目前的油船供需进行比较,在此基础上对未来油船价格以及油船
介绍了立缫机技改为SFD507A型自动缫丝机的机型特点和生产实绩,以及在设备管理、操作管理、成本管理方面的一些体会.
引言rn在当今的电子产品中,随着器件的精密度和准确性提升,其电气特性的要求也更加严格,电信号值的一点偏差都会导致很严重的问题.所以不管是设计过程还是使用过程,电信号值