论文部分内容阅读
该文根据锌基合金不同使用工况,利用SRV滑动摩擦磨损实验仪和M-200磨损实验机研究了ZA_(27)CuMgRE合金同材质为摩擦副,以及与45 ̄#钢配副的摩擦磨损特性,研究发现,合金在30 ̄#机油润滑时同材质或与45 ̄#钢配副都具有良好的耐磨性能;而于摩擦工况下易发生粘着,不宜使用,但也证明在短时间润滑失效时仍具有良好的拉伤抗力。合金中加入0.1%~0.6%稀土,能使微观组织得到改善,耐摩擦磨损性能提高20%~50%以上。
According to the different working conditions of Zinc-based alloy, this paper studied the friction and wear of ZA 27 CuMgRE alloy with friction pair as well as the wear and friction of 45 ° steel with SRV sliding friction and wear tester and M-200 wear tester. Characteristics, the study found that the alloy in the 30 # oil lubrication with the same material or with 45 ~ # steel with deputy have good wear resistance; and in the friction conditions prone to sticky, should not be used, but also proved that in a short period of time Lubricating failure still has good resistance to strain. Adding 0.1% ~ 0.6% rare earth alloy can improve the microstructure and improve the friction and wear resistance by 20% ~ 50%.