在第12期里介绍了“气压抽水箱”不能成功的道理,这里再介绍再一种形式的永动水车。下图是清河县另外一个同志设计的永动水车,它的右边是一部普通的管式水车,左边是一个水轮,受到水的冲击便不停地旋转,水轮的前边连着一个皮带轮上,挂有皮带与右边水车链轮上的皮带轮相连。这个水车的设计人以为:先用人力或其他力量转动水车的链轮,把井水提升到水车的水槽之后,让水从槽流出后冲击左边的水轮旋转,水轮又通过皮带带动水车链轮不断提水上升,就这样水车提水冲动水轮,水轮又 Introduced in the twelfth period “pressure pumping tank” can not be successful truth, here to introduce another form of perpetual waterwheel. The picture below is another Yonghe waterwheel designed by another comrade in Qinghe County. On the right is an ordinary water tandem waterwheel. On the left is a water wheel, which is constantly rotated by the impact of water. The front of the waterwheel is attached On one pulley, the belt is attached to the pulley on the right waterwheel sprocket. The designer of the watermill thought: first by human or other forces to rotate the waterwheel sprocket, the well water to the water tank after the sink, let the water out of the tank after impact on the left of the water wheel rotation, the water wheel through the belt Driven waterwheel sprocket constantly raise water, so waterwheel lift impulse water wheel, water wheel again