Tribological Properties of Mo-N Hard Coatings on Ti6Al4V by Double Glow Discharge Technique

来源 :材料科学技术学报 | 被引量 : 0次 | 上传用户:nn2268006
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Mo-N hard coatings on Ti6Al4V were formed using double glow discharge technique. The fundamental coating properties,such as the phase, hardness and elastic modulus were investigated. The tribological performances of the coatings in dry wear condition were studied by means of ball-on-disc wear machine. The experimental results showed that the thickness of the Mo-N hard coating was about 10 μm. The coating was single fcc γ-Mo2N phase with (200) preferred orientation. The hardness and the elastic modulus of the coating was 13.80 GPa and 261.65 GPa respectively. The surface treatment enhanced the hardness and elastic modulus of the surface of Ti6Al4V base greatly. With GCr15 slider ball, the friction coefficient of the Mo-N hard coatingwas in the range of 0.56~0.65 at the steady state. Though the coating did not show friction reducing effect, it improved the wear resistance of Ti6Al4V greatly.
其他文献
In order to obtain solubility data of propylene in 2-butanol+water solutions, gas-liquid equilibrium(GLE) experiment was carried out at 303.15-333.15 K, 0.3-1.2
Absorption rate of CO2 into aqueous solution of N-methyldiethanolamine (MDEA) blended with di-ethanolamine (DEA) and piperazine (PZ) was studied and a kinetic m
The ceramic/metal gradient thermal barrier coatings (CMGTBCs) which combined the conceptions of thermal barrier coatings ( TBG ) and functional gradient materia
Studies of the breaking criteria for solitary waves on a slope are presented in this paper. The boundary element method is used to model the processes of shoali
Griseofulvin (GF) is an antifungal drug whose pharmaceutical activity can be improved by reducingparticle size. In this study the rapid expansion of supercritic
The crystallization behavior of desulfurization product is directly related to its high-temperatureresistant ability. Effects of the additive on the sulfur-fixa
The three way catalysts (TWCs) promoters (Ce Zr)O 2, (Pr Ce Zr)O 2 and (Pr Zr)O 2 were prepared by sol gel like method. They were characterized by XRD,
A culture of Lithospermum erythrorhizon adsorbed on fungal cell wall polysaccharides, a novel bio-adsorbent made from fnngal cell wall, has been established in
The influences of alloying elements W, Mo, Cr, and Nb on retainedβ phase in 47Al based near γ-TiAl alloys have been studied.The results reveal that the amount
Suspended emulsion polymerization of vinyl chloride was carried out in a 5 L autoclave. The influenceof agitation, polymerization conversion, dispersant and sur