SHQ-30混砂机由于具有可调的辗轮和立式高速搅拌器,所以用来混辗涂料具有效率高、涂料性能好等特点。但由于上盖为弧形,见图(左),搅拌器将涂料打到盖上后,就顺弧形面下流到辗外边,损失严重,无论怎样盖紧也无济于事。我厂对其进行了改进,见图(右),在盖的内部焊了一圈30mm宽,2mm厚的钢条,使流下来的涂料又流回碾子部,经一年多的使用效果良好,解决了涂料外流现象。 SHQ-30 sand mixer with adjustable roller and vertical high-speed mixer, so the coating used for high efficiency coating, coating performance is good and so on. However, due to the cover is curved, see Figure (left), the mixer hit the lid on the paint, the arc surface flow down to the outside, the loss is serious, no matter how tightly covered does not help. I plant to improve it, see Figure (right), in the cover welded a circle of 30mm wide, 2mm thick steel bar, so that the flow of paint back to the roller again, after more than a year of good results , To solve the paint outflow phenomenon.