我国农产品出口不稳定性成因的初步探析——以粮食、茶叶、棉花为例

来源 :中国农村观察 | 被引量 : 0次 | 上传用户:bleachss
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本文选取时间序列1985~2002年,以粮谷、茶叶和棉花为例,通过计量分析,从国内因素和国际因素两个方面对我国农产品出口不稳定性的成因进行了讨论。研究发现:不同农产品的不稳定性不同,受到的影响因素亦各不相同,通过影响国内需求波动和稳定国内供给可以显著降低不同商品的出口不稳定性程度,国外因素对于单个农产品的影响则没有国内因素显著;而考察其整体影响因素可知,国内的需求波动对于出口的价格和数量的不稳定性影响显著,国内的供给波动仅对出口额有影响,而国外需求波动则对出口量和出口额均有显著影响,对出口价格则无显著影响。 This paper selects the time series from 1985 to 2002, taking the grain, tea and cotton as examples, through the econometric analysis, the reasons for the instability of China’s agricultural exports are discussed from the domestic and international factors. The study found that: the instability of different agricultural products is different, and the influencing factors are also different. By affecting domestic demand fluctuations and stabilizing domestic supply, the export instability of different commodities can be significantly reduced. The impact of foreign factors on individual agricultural products is not The domestic factors are significant. However, considering the overall influencing factors, domestic demand fluctuations have a significant impact on the instability of export prices and quantities. Domestic supply fluctuations have only an impact on exports while fluctuations in foreign demand have a negative impact on exports and exports The amount of both have a significant impact on the export price did not have a significant impact.
其他文献
从圆柱形产品的模具设计公式出发,针对粉末冶金齿轮成形模具的不同设计方法计算其设计误差,并组合不同设计方法以减少设计误差,最终得到设计误差为0的优化设计方法,实现对粉
飞机座舱是飞行员获取飞行信息、完成飞行任务的工作场所,座舱布局设计对飞机的安全,作战效能的发挥起着重要的作用.对典型俄制、美制飞机座舱布局技术特点进行分析梳理,从座
根据部队机务维护的需要,依靠新型战机的机载计算机设备及部队技术力量的现状,提出了机务维护两级专家系统(机载专家系统和基地专家系统)的思想,并对其分别进行了结构设计,明
The laser bending of single-crystal silicon sheet (0.2 mm in thickness) was investigated with JK701 Nd:YAG laser. The models were developed to describe the beam
Born on October 12,1942 in Chengdu,Prof.Liu had studied English language and literature for 5 years in Shanxi University and graduated in 1967.He earned M.A.deg
两款钻孔直径达80mm的磁力钻FEIN最新推出两款钻孔直径达80mm的磁力钻,以精确、经济、耐用见称--KBM 80 U及KBM80 auto。KBM 80 U是手动控制进刀的磁力钻。KBM 80 auto则是数
为探究掺杂CeO2与ZrO2陶瓷轴承干法制粒分散性的关系,制备了掺杂不同含量CeO2的ZrO2陶瓷轴承干法制粒坯料颗粒,采用高精度网筛对坯料颗粒进行筛分、扫描电子显微镜观测微观形
研究333K时Ti0.17Zr0.08V0.35Cr0.1Ni0.3合金的循环稳定性和高温倍率放电性能。333K时,当放电电流密度为60mA/g时,Ti0.17Zr0.08V0.35Cr0.1Ni0.3合金第1次放电容量为450mAh/g
[王仁强]四川外国语大学教授,外国语言学及应用语言学专业(词典学方向)博士生导师,研究生院院长、学科办主任兼词典学研究所所长。广东外语外贸大学外国语言学及应用语言学专
以超细WC粉和羰基镍粉为原料,通过添加少量添加剂、碳粉、钨粉,并采用低压烧结的方法制备出WC-6Ni无磁硬质合金.研究了低压烧结温度和配碳量对WC-6Ni无磁硬质合金的密度、硬