目前,槽式打浆机仍是浆粕以及黏状浆打浆的主要设备,而飞刀辊则是槽式打浆机的重要部件,一般情况下,飞刀辊的辊体上镶嵌有70~90个飞刀片。工作时,飞刀辊绕其主轴高速旋转,辊体上的飞刀片随之高速旋转,并与固定在浆池底部的底刀共同对纤维进行挤 At present, the trough beater is still pulp and sticky pulp beating the main equipment, and flying knife roll trough beater is an important component, under normal circumstances, flying roll roller body inlaid with 70 to 90 Fly blade. At work, the flying knife roller rotates at high speed around its main shaft, the flying blade on the roller body rotates with high speed at the same time, and the fiber is squeezed together with the bottom knife fixed at the bottom of the slurry pool