论文部分内容阅读
Deduction of plastic work rate per unit volume for unified yield criterion and its application
【出 处】
：
中国有色金属学报（英文版）
【发表日期】
：
2009年3期
其他文献
以粉末冶金夹杂裂纹扩展寿命预测理论为基础,建立了裂纹扩展可靠性分析的剩余强度干涉模型与寿命干涉模型.采用改进一次二阶矩法分析单个夹杂裂纹扩展的可靠性.为了分析多个
Microstructures of as-cast Al-Mg-Si-Mn alloys with and without Sc and Zr were investigated by optical microscopy, scanning electronic microscopy(SEM) and energy
LiCaBO3:Eu3+ phosphor was synthesized by high solid-state reaction method, and its luminescent characteristics were investigated. The emission and excitation sp
The limiting length of tunnels, llim, of Al foil electro-etched in HCl-H2SO4 solution and the corresponding anodic polarization curves in the same solution were
Uniform nanoparticles of molybdenum nitride were synthesized by temperature-programmed reaction(TPR) using MoO3 and ammonia as reactants. This material was char
Microstructure and texture analysis of YBCO thick film with peritectic growth on unoriented silver s
YBCO textured thick film was prepared by direct periteetic growth method. Microstructure of the film was characterized. Electron backscattered diffraction (EBSD
Hydrogen absorption and desorption charactersfics for high coereivity NdDyFeCoNbCuB sintered bulk magnets were studied, by differential scanning calorimetry (DS
Nominal (Li0.5Ce0.5)x(Na0.5Bi0.5)(1-x)Na0.5Bi4.5Ti5O18 composite ceramics were fabricated using conventional solid-state reaction method. The coexistence of bis
A mathematical model is formulated to predict the shape evolution and the final geometry of a tubular product prepared by spray forming. The effects of several
SiCN thin films and Cu/SiCN/Si structures were fabricated by magnetron sputtering. And some samples underwent the rapid thermal annealing(RTA) processing. The t