【摘 要】
：
A novel image fusion algorithm based on bandelet transform is proposed. Bandelet transform can take advantage of the geometrical regularity of image structure and represent sharp image transitions such as edges efficiently in image fusion. For reconstruct
【机 构】
：
DepartmentofCommunicationEngineering,XiamenUniversity,Xiamen361005DepartmentofElectronicInformationE
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
A novel image fusion algorithm based on bandelet transform is proposed. Bandelet transform can take advantage of the geometrical regularity of image structure and represent sharp image transitions such as edges efficiently in image fusion. For reconstructing the fused image, the maximum rule is used to select source images' geometric flow and bandelet coefficients. Experimental results indicate that the bandelet-based fusion algorithm represents the edge and detailed information well and outperforms the wavelet-based and Laplacian pyramid-based fusion algorithms, especially when the abundant texture and edges are contained in the source images.
其他文献
3 μm激光在国防安全、生物医疗、光谱分析等领域具有广阔的应用前景。与非线性频率变换、半导体激光技术相比，利用掺Er的激光增益介质产生3 μm激光是一种比较直接、高效的方法。随着3 μm掺Er激光器在输出功率和效率方面的突破，半导体激光泵浦的3 μm掺铒固体激光已成为热点研究方向。回顾了不同基质材料掺杂Er离子产生3 μm激光的输出特性和研究进展；从铒离子能级结构出发，分析了铒离子间的能量传递上转换、激发态吸收等跃迁过程对3 μm激光输出性能的影响，并对3 μm稀土离子掺杂固体激光器的功率提升潜力和发展前
美帝国际商业机械公司已用计算机制出了全光照片。该公司报导的这一新技术可望大大扩展全光照相技术在工程和科学中的应用。计算机能产生存在于概念，而不是实际存在的“物体”的数学全光照片。
In this paper, we present an ultra-compact 1D photonic crystal (PhC) Bragg grating design on a thin film lithium niobate slot waveguide (SWG) via 2D- and 3D-FDTD simulations. 2D-FDTD simulations are employed to tune the photonic bandgap (PBG) size, PBG ce
Shearlets not only possess all properties that other transforms have, but also are equipped with a rich mathematical structure similar to wavelets, which are associated to a multi-resolution analysis. Recently, shearlets have been used in image denoising,
为了提高单点金刚石车削CaF2衍射光学元件(DOE)的表面质量和衍射效率,首先基于Beckman标量散射理论和有效面积法,建立了表面粗糙度误差和表面轮廓误差对衍射效率影响的数学模型。然后,结合CaF2的车削特性和DOE的结构特点,优化了CaF2 DOE的车削模型。同时,给出了不同工艺条件下半圆金刚石刀具的最佳车削位置和最优刀具半径,实现了对CaF2 DOE表面粗糙度的控制。最后,在该优化模型的指导下,获得了表面粗糙度为
激光诱导击穿光谱技术(LIBS)具有无需制备样品、多元素同时测量和快速检测等优点,在物质检测领域得到了广泛应用,选择合适的实验装置参数是其取得良好检测效果的重要基础。在单因素实验的基础上,以激光能量、延迟时间和焦深为影响因素,以光谱信背比作为响应指标,建立了一种优化激光诱导击穿光谱实验装置参数的多因素响应面模型。研究了不同影响因素及它们之间的耦合作用对光谱质量的影响,得到的最优实验参数为激光能量114 mJ,延迟时间1.86 μs,焦深1.75 mm。最后,对响应面法所得的最优实验参数进行实验验证,得出谱
利用小波变换频谱特性和图像奇异值分解特征,提出了一种结合人眼对比感知特性的图像水印算法。并通过结合人眼视觉特性,将置乱的水印以一定的强度嵌入到图像的奇异值矩阵中,采用其逆过程提取水印,通过仿真进行了验证。对其实施了压缩、剪切、高斯噪声和中值滤波攻击测试,与前人提出的8种水印算法的抗攻击性能进行对比分析。结果表明,在质量因子为20%的较强压缩攻击下,提取水印的NC值仍能达到0.8359,含水印图的P
本文用相对论多组态Dirao-Fook广义平均模型(MCDF-EAL)计算了58≤Z≤71的2P~53s、2P~53p和2P~53d组态的各27条精细结构能级,以及其作为等离子体激光工作物质所可能发射出的激光波长值。
Auto-alignment is a basic technique for high-power laser systems. Special techniques have been developed for laser systems because of their differing structures. This paper describes a new sensor for auto-alignment in a laser system, which can also serve