【摘 要】
：
ZrC and ZrB2 are both typical ultra-high temperature ceramics, which can be used in the hyperthermal environment. In this study, a method for preparing ultrafine ZrC–ZrB2 composite powder was provided, by using the raw materials of nano ZrO2, carbon black
【机 构】
：
State Key Laboratory of Advanced Metallurgy,University of Science and Technology Beijing,Beijing 100
论文部分内容阅读
ZrC and ZrB2 are both typical ultra-high temperature ceramics, which can be used in the hyperthermal environment. In this study, a method for preparing ultrafine ZrC–ZrB2 composite powder was provided, by using the raw materials of nano ZrO2, carbon black, B4C, and metallic Ca. It is worth pointing out that ZrC–ZrB2 composite powder with any proportion of ZrC to ZrB2 could be synthesized by this method. Firstly, a mixture of ZrC and C was prepared by carbothermal reduction of ZrO2. By adjusting the addition amount of B4C, ZrC was boronized by B4C to generate ZrC–ZrB2 composite powder with different compositions. Using this method, five composite powders with different molar ratios of ZrC and ZrB2 (100ZrC, 75ZrC–25ZrB2, 50ZrC–50ZrB2, 25ZrC–75ZrB2, and 100ZrB2) were prepared. When the temperature of boronization and decarburization process was 1473 K, the particle size of product was only tens of nanometres. Finally, the oxidation charac-teristics of different composite powders were investigated through oxidation experiments. The oxidation resistance of ZrC–ZrB2 composite powder continued to increase as the content of ZrB2 increased.
其他文献
Reverse flotation desilication is an indispensable step for obtaining high-grade fluorapatite. In this work, dodecyltrimethylammoni-um bromide (DTAB) is recommended as an efficient collector for the reverse flotation separation of quartz from fluorapatite
Tribology, which is the study of friction, wear, and lubrication, largely deals with the service performance of structural materials. For example, newly emerging high-entropy alloys (HEAs), which exhibit excellent hardness, anti-oxidation, anti-softening
Combustion kinetics of the hydrochar was investigated using a multi-Gaussian-distributed activation energy model (DAEM) to ex-pand the knowledge on the combustion mechanisms. The results demonstrated that the kinetic parameters calculated by the multi-Gau
Porous materials have promise as sound insulation, heat barrier, vibration attenuation, and catalysts. Most industrial solid wastes, such as tailings, coal gangue, and fly ash are rich in silicon. Additionally, a high silicon content waste is a potential
Petroleum coke is industrial solid wastes and its disposal and storage has been a great challenge to the environment. In this study, petroleum coke was utilized as a novel co-reduction reductant of low-grade laterite ore and red mud. A ferronickel product
A new method is proposed for the recovery of Mn via the direct electrochemical reduction of LiMn2O4 from the waste of lithium-ion batteries in NaCl?CaCl2 melts at 750℃. The results show that the LiMn2O4 reduction process by the electrochemical method on t
To improve the separation capacity of uranium in aqueous solutions, 3R-MoS2 nanosheets were prepared with molten salt electro-lysis and further modified with polypyrrole (PPy) to synthesize a hybrid nanoadsorbent (PPy/3R-MoS2). The preparation conditions
The effect of extrusion temperature and ratio on the microstructure, hardness, compression, and corrosion behavior of Mg–5Zn–1.5Y alloy were analyzed in this study. The microstructural observations revealed that the cast alloy consists of α-Mg grains, and
Frequent offshore oil spill accidents, industrial oily sewage, and the indiscriminate disposal of urban oily sewage have caused seri-ous impacts on the human living environment and health. The traditional oil–water separation methods not only cause easily
Transition metal phosphides (TMPs) have exhibited decent performance in an oxygen evolution reaction (OER), which is a kinetic bottleneck in many energy storages and conversion systems. Most reported catalysts are composed of three or fewer metallic compo