Effect of Nano Silica on Hydration and Microstructure Characteristics of Cement High Volume Fly Ash

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:xxfei23
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The influences of nano silica (NS) on the hydration and microstructure development of steam cured cement high volume fly ash (40 wt%, CHVFA) system were investigated. The compressive strength of mortars was tested with different NS dosage from 0 to 4%. Results show that the compressive strength is dramatically improved with the increase of NS content up to 3%, and decreases with further increase of NS content (e g, at 4%). Then X-ray diffraction (XRD), differential scanning calorimetry-thermogravimetry (DSC-TG), scanning electron microscope (SEM), energy disperse spectroscopy (EDS), mercury intrusion porosimeter (MIP) and nuclear magnetic resonance (NMR) were used to analyze the mechanism. The results reveal that the addition of NS accelerates the hydration of cement and fly ash, decreases the porosity and the content of calcium hydroxide (CH) and increases the polymerization degree of C-S-H thus enhancing the compressive strength of mortars. The interfacial transition zone (ITZ) of CHVFA mortars is also significantly improved by the addition of NS, embodying in the decrease of Ca/Si ratio and CH enrichment of ITZ.
其他文献
Pure copper plates were coated by Ni-TiC dipulse current plating method.The effects of adding different concentration(ranging from 0.5 g/L to 3.0 g/L) of attapulgite nano particles to the plating bath on the surface morphology,wear resistance,and oxidatio
The elastic-plastic transition regime and brittle-ductile transition regime in scratch process for optical glass BK7 were analyzed based on the Hertzian equation and the stress ratio theory which was proposed by Wei. The interacting scratch process for op
Four cellulose ethers (CEs) were compared for their effects on the pore structure of cement paste using mercury intrusion porosimetry. The experimental results show that the total pore volume and porosity of cement pastes containing the four cellulose eth
The Ni nanoparticles coated with Pb(Zr,Ti)O3 (PZT) were synthesized by a sol-gel method and in situ reaction. And their structure, oxidation resistance, and electromagnetic properties were investigated. The X-ray diffraction patterns (XRD) exhibited that
Using L-glutathione (GSH) as a capping agent,ZnSe/GSH quantum dots (QDs) were prepared under microwave irradiation and irradiated under dark,ultraviolet light and incandescent light,respectively.The properties and interaction of different lights irradiate
Induction melting was used as a routine method to synthesize Mg23Ni10, Mg22LaNi10 and Mg21La2Ni10 alloys, and followed by a detailed microstructural characterization which included X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy di
A novel gap-plasmon of Fe3O4@Ag core-shell nanoparticles for surface enhanced fluorescence detection of Rhodamine B (RB) was developed.Fe3O4@Ag core-shell nanostructures with Ag shell and Fe3O4 core were synthetized by self-assembled method with the assis
Learning from the process of biominerals formation provides tremendous ideas for developing advanced synthesis techniques.According to the structure formation of tooth enamel,a recombinant amelogenin his-AmelⅩ was designed and constructed.The protein was
Wear-resistant cladding plates consisting of a substrate (Q345 R) and a clad layer (BTW1) were bonded through hot rolling at the temperature of 1 200 ℃ and a rolling speed of 0.5 m/s. The microhardness of the cladding plate was also tested after being hea
The lap joints of Fe-based metallic glass ribbons were carried by resistance spot welding, and the microstructures of spot welds were investigated by X-ray diffraction and transmission electron microscopy. The results indicated that the perfect formations