论文部分内容阅读
A series of Ce-doped MnOx/TiO2 catalysts were prepared by impregnation method and used for catalytic oxidation of NO in the presence of excess O2. The sample with the Ce doping concentration of Ce/Mn=1/3 and calcined at 300°C shows a superior activity for NO oxidation to NO2. On Ce(1)Mn(3)Ti catalyst, 58% NO conversion was obtained at 200°C and 85% NO conversion at 250°C with a GHSV of 41000 h-1, which was much higher than that over MnOx/TiO2 catalyst (48% at 250°C). Characterization results implied that the higher activity of Ce(1)Mn(3)Ti could be attributed to the enrichment of well-dispersed MnOx on the surface and the abundance of Mn3+ and Ti3+ species. The addition of Ce into MnOx/TiO2 could improve oxygen storage capacity and facilitate oxygen mobility of the catalyst as shown by PL and ESR, so that its activity for NO oxidation could be enhanced. The effect of H2O and SO2 on the catalyst activity was also investigated.
A series of Ce-doped MnOx / TiO2 catalysts were prepared by impregnation method and used for catalytic oxidation of NO in the presence of excess O2. The sample with Ce doping concentration of Ce / Mn = 1/3 and calcined at 300 ° C On Ce (1) Mn (3) Ti catalyst, 58% NO conversion was obtained at 200 ° C and 85% NO conversion at 250 ° C with a GHSV of 41000 h-1, which was much higher than that over MnOx / TiO2 catalyst (48% at 250 ° C). Characterization results implied that the higher activity of Ce (1) Mn (3) Ti could be attributed to the enrichment of well-dispersed MnOx on the surface and the abundance of Mn3 + and Ti3 + species. The addition of Ce into MnOx / TiO2 could improve oxygen storage capacity and facilitate oxygen mobility of the catalyst as shown by PL and ESR, so that its activity for NO oxidation could be enhanced. The effect of H2O and SO2 on the catalyst activity was also investigated.