论文部分内容阅读
平常我们使用的话筒上的金属防护网罩多为圆球形。可是,大家都知道话筒在使用和放置的过程中,难免失手滑落到地上,网罩被摔扁了。需要及时修复它。 工具:一截木板,两把塑料或木制柄起子。其中一把起子柄要求直径为20mm,因为此把起子是要伸进网罩内,而网罩口内径为32mm且摔扁处不会只集中在网罩顶中心一处,如果摔扁处偏离一点,起子柄头过大就抵不到了。另外,起子柄末端要求是圆弧状,且弧状和防护罩圆弧是相同的或近似为好。 方法:首先将防护网罩内的防尘海绵罩取出来(以免在修复过程中被起子抵破)。然后将直径
Usually we use the microphone on the metal protective grille mostly spherical. However, we all know that in the process of using and placing the microphone, it is inevitable that the hand slipped to the ground and the screen cover fell flat. Need to fix it in time. Tools: a piece of wood, two plastic or wooden handle screwdrivers. One screwdriver handle requires a diameter of 20mm, because this screwdriver is to be inserted into the net cover, and the inner diameter of the net cover mouth 32mm and squatting will not be concentrated only in the center of the top of the net cover, if the wrestling flat deviation A bit, screwdriver handle too large to reach less than. In addition, the screwdriver shank end requirements are arc-like, and arc and shield arc is the same or near good. Method: First, remove the protective cover of the dustproof sponge cover (in order to avoid screwdriver in the repair process to break). Then the diameter