【摘 要】
：
To obtain homogenous layered oxide Li(Co1/3Ni1/3Ni1/3Mn1/3)O2 as a lithium insertion positive electrode material,the sol-gel process using citric acid as a chel
【机 构】
：
State Key Laboratory of Advanced Technology for Material Synthesis and Processing
【基金项目】
：
The Foundafion for Innovative Research Team of Hubei Province of China;国家自然科学基金;国家重点基础研究发展计划(973计划)
论文部分内容阅读
To obtain homogenous layered oxide Li(Co1/3Ni1/3Ni1/3Mn1/3)O2 as a lithium insertion positive electrode material,the sol-gel process using citric acid as a chelating agent was applied.The material Li(Co1/3,Ni1/3Mn1/3)O2 was synthesized at different calcination temperatures.XRD experiment indicated that the hyered Li(Co1/3Ni1/3Mn1/3)O2material could he synthesized at a lower temperature of 800℃,and the oxidation state of Co,Ni,and Mn in the cathode confirmed by XPS were +3,+2,and +4,respectively.SEM observations showed that the synthesized material could form homogenous particle morphology with the particle size of about 200nm In spite of different calcination temperatures,the charge-discharge curves of all the samples for the initial cycle were similar,and the cathode synthesized at 900℃ showed a small irreversible capacity loss of 11.24% and a high discharge capacity of 212.2 mAh.g-1 in the voltage range of 2.9-4.6 V.
其他文献
Feedback control systems wherein the control loops are closed through a real-time network are called networked control systems (NCS). The defining feature of an
Modern automotive petrol engine performance is significantly affected by effective tune-up. Current practice of engine tune-up relies on the experience of the a
Ternary and quadruple lithium silicon nitride anode materials for lithium ion batteries with different precursors were prepared by the simple process of high-en
The unit cell of lanthanum chromate was constructed by calculating equivalent points. By means of calculation of the hole octahedrally surrounded by O2- ions, i
The photoluminescence glass fiber in Eu3+ doped ZnO-MgO-CdO-B2O3 is drawn artificially by high-temperature solid state reaction and glass stream hauling method
Finite element model was developed to analyze thermal residual stress distribution of diamond coating on graded and homogeneous substrates. Graded cemented carb
The RNG к-ε model considering the buoyancy effect,which is solved by the hybrid finite analytic method,is used to simulate the mixture of the horizontal round
The extraction technology of vanadium from stone coal by means of no-salt-roasting and dilute acid solution leaching treatment has the advantages of low polluti
To investigate the formation of internal cracks in steel billets during soft reduction, fully coupled thermo-mechanical finite element models were developed usi
Based on unit cell model,the 3D 4-directional braided composites can be simplified as unidirectional composites with different local axial coordinate system and