The hot deformation behavior of Al-Cu-Li alloy was investigated by hot compression tests in the temperature range of 340-500 ℃ with strain rate of 0.001-10.000
The defect-free CoCrNbNiW high-entropy alloy coating was successfully prepared by laser melting deposition,and its microstructure and wear resistance were inves
The Bi0.5Sb1.4-xNaxIn0.1Te3 (x =0.02-0.20) alloys were fabricated by high vacuum melting and hotpressing technique.The phase structures and morphology of the bu
Ultrafine rare-earth oxides (REOs) are widely applied in all fields of daily life,but the conventional preparation methods are limited by a long procedure,low e
Cu matrix composite materials reinforced with B4C particle at four different contents (1.5 wt%,3.0 wt%,4.5 wt% and 6.0 wt%) and also CuAl matrix composites with 13
Nickel leaching from low-grade nickel matte (LGNM) using aqueous ferric chloride solution was studied.The influence of factors such as leaching temperature and
(1-x)(K0.495Na0.495La0.01)(Nb0.997Cu0.0075)O3-xBi(Mg0.5Zr0.5)O3 (abbreviated as KNLNC-xBMZ) ceramics were designed and prepared.The phase transition,microstruct
A new substrate,aligned Ag nanowires decorated with silver nanoparticle composite structure (AgNWs@AgNPs),was fabricated to investigate metalenhanced fluorescen