Acting mechanism of F, K, and Na in the solid phase sintering reaction of the Baiyunebo iron ore

来源 :矿物冶金与材料学报 | 被引量 : 0次 | 上传用户:killer258
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The effect of F, K, and Na on the solid phase reaction of the Baiyunebo iron ore was investigated by differential thermal analysis (DTA) and X-ray diffraction (XRD). It has been identified that alkaline elements K and Na in the Baiyunebo ore instigate the formation of low melting point compounds Na_2SiO_3 and Na_2O·Fe_2O_3 and the generation of molten state in the solid phase sintering. Element F in the Bai yunebo ore facilitates the formation of cuspidine compound 3CaO·2SiO_2·CaF_2 in the solid phase reaction. The cuspidine compound is kept in solid as one of the final products through the entire sintering process due to its high melting point. In the sintering process, CaF_2 and SiO_2 react with CaO first and form 3CaO·2SiO_2·CaF_2 and 3CaO·2SiO_2, so the formation of ferrites, Na_2O·Fe_2O_3, and 2CaO·Fe_2O_3 is inhibited .
其他文献
The Indium tin oxide (ITO) thin film possesses excellent photoelectric properties that enable it to act as an ideal transparent conductor. To obtain high-qualit
Zr_(58.5)Ti_(14.3)Nb_(5.2)Cu_(6.1)Ni_(4.9)Be_(11.0) bulk metallic glass matrix composites, containing β-Zr dendrites, were fabricated by Bridgman solidificatio
Superfine cerium-zinc oxides Ce_(1-x)Zn_xO_(2-x) with x = 0, 0.1, 0.3, 0.5, and 1.0 were obtained by grinding Ce(SO_4)_2·4H_2O,ZnSO_4·7H_2O and NH_4HCO_3 unde
Aluminum coatings on Mg alloy AZ31 were fabricated using the thermal spraying technique, and then sealed with silane. The surface morphology and chemical groups
The hot compression tests of Super304H austenitic heat resistant steel were carried out at 800-1200℃ and 0.005-5 s~(-1) using a Gleeble 3500 thermal-mechanical
The adsorption of Ca( Ⅱ) ions from aqueous solution by chitosan a-ketoglutaric acid (KCTS) and hydroxamated chitosan a-ketoglutaric acid (HKCTS) was studied in
The influences of 2.5wt% Mn addition on the microstructure and mechanical properties of the Cu-11.9wt%Al-3.8wt%Ni shape memory alloy (SMA) were studied by means
Fe-based amorphous alloys with high inm content of 76at%-80at% were synthesized in the Fe-Mo-Si-P-C-B alloy system by the single roller melt-spinning technique.
The mixture of factor analyzers (MFA) can accurately describe high resolution range profile (HRRP) statistical characteristics.But how to determine the proper n
The dynamic modeling and solution of the 3-(R)RS spatial parallel manipulators with flexible links were investigated. Firstly, a new model of spatial flexible b