Optimal MMSE successive interference cancellation in group-wise STBC MIMO systems

来源 :Journal of Systems Engineering and Electronics | 被引量 : 0次 | 上传用户:hanqingnan
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
An optimal minimum mean square error successive interference cancellation (OMMSE SIC) scheme for Group-wise space-time block coding (G-STBC) multiple-input multiple-output (MIMO) systems is presented. In such a system, transmit antennas are partitioned into several STBC encoding groups and each group transmits independent data stream which is individually STBC encoded. On the receiver side, by exploring the temporal constraint provided by STBC, an equivalent channel model similar to the one in standard vertical Bell laboratories layered space-time (V-BLAST) systems is generated. Then OMMSE SIC algorithm is performed to detect all the transmitted information. Simulation compares the proposed scheme with non-ordering MMSE SIC scheme and the corresponding equal data rate scheme in V-BLAST systems with the same receive antennas’ number. Result shows that the proposed scheme has better performance than non-ordering MMSE SIC scheme and by introducing more transmit antennas and adopting the OMMSE SIC scheme, better performance also can be achieved than corresponding V-BLAST systems. An optimal minimum mean square error following interference cancellation (OMMSE SIC) scheme for Group-wise space-time block coding (G-STBC) multiple-input multiple-output (MIMO) systems is presented. into several STBC encoding groups and each group transmitted individually data stream which is individually STBC encoded. On the receiver side, by exploring the temporal constraint provided by STBC, an equivalent channel model similar to the one in standard vertical Bell laboratories layered space-time ( V-BLAST) systems is generated. Then the OMMSE SIC algorithm is performed to detect all the transmitted information. Then the OMMSE SIC algorithm is performed to detect all the transmitted information. ’number. Result shows that the proposed scheme has better performance than non-ordering MMSE SIC scheme and by introducing more transmit antennas and adopting the O MMSE SIC scheme, better performance also can be achieved than corresponding V-BLAST systems.
其他文献
  金属微孔膜是一类新型过滤分离材料,具有精度高、处理量大,耐高温、耐高压,可焊接,可再生等优点,已经在多个工业领域得到应用。本文介绍了金属微孔膜的概念、分类、孔结构特点
  目前制备Nb3Al合金的方法工艺复杂、成本高,且产品性能差。本文研究高能球磨制取Nb(Al)预合金粉末,然后采用粉末冶金成型和烧结工艺获得Nb3Al金属间化合物。研究结果表明,高
  随着发动机技术的迅猛发展,越来越多的发动机采用铝合金缸体。那么,粉末冶金轴承盖在内圆弧加工时,就面临着与铝合金加工性能相匹配的问题。本文提出了一种新型表面改性工艺
当大盘从6000点跌破2000点,损失最惨重的恰巧是所谓“价值投资”。股市最火爆的时候,每天都有无数投资专家教育你啥叫价值投资,他们引用最多的一句话就是巴菲特老先生说过的:
不愿意申报广告资质认证的企业究竟如何看待这个认证?它们希望这个认证如何发展呢?1、怎样看待中国广告企业资质认定?首先,从出发点来看,中国广告协会的广告企业资质认定对于
王苏炎:1942年7月15日出生于江苏省东台县。1960年上海市上海中学毕业,考入北京中国科学技术大学;1965年分配到第七械工业部第三研究院工作;1970年底调干参军至总参三部工作
  采用机械合金化制备了不同Fe含量的(Ti69.7Nb23.7Zr4.9Ta1.7)100-xFex非晶/纳米晶合金粉末,随后采用放电等离子烧结一非晶晶化法合成了高强低模的超细晶钛基复合材料。结
会议
丹江电厂水轮机运行工听力检测分析王金明,周辉,陈玉忠,贾均江(丹江管理局职工医院,卫生处)报道:该厂水轮机工作区噪声强度为100~101dB(A),听力检测76名水轮机运行工,年龄16~48岁,男女之比为1:4:,工龄3年以下者27人
  采用放电等离子技术制备了WC-x wt.%ZrO2 (x=0,1,3,8,10)材料,并研究了不同ZrO2含量对材料显微组织与力学性能的影响。结果显示,得到的材料里面ZrO2中四方相t-ZrO2为主相;随
  本文采用超声疲劳试验方法研究了喷丸后续处理工艺对Fe-2Cu-2Ni-1 Mo-1C材料的疲劳性能的影响。结果显示:喷丸处理可以明显提高Fe-2Cu-2Ni-1Mo-1C烧结钢的疲劳性能,在106
会议