我厂研制的L-16连铸机,其中主要部件是轮式结晶器,该结晶器为铜制焊接结构(如图所示)。轮式结晶器是由十二块图示件所组成的,是一个直径为3195毫米的轮体。每块约40公斤,主体是由三个规格为65×35×10的T3扁管压制成弧形后组焊的;进出水口是由两个H62的倒细扣丝座焊在底弧扁管上;四个ф15×2的T3连通管焊在两侧弧形扁管和底弧扁管两端的40毫 I plant developed L-16 caster, which is the main component of the wheel mold, the mold for the copper welding structure (as shown). Wheel crystallizer is composed of twelve pieces of the figure, is a 3195 mm diameter wheel. Each about 40 kilograms, the main body is composed of three specifications of 65 × 35 × 10 of the flat tube into the arc after the arc welding; inlet and outlet is made by the two H62 inverted buckle wire welded in the bottom arc flat tube ; Four ф15 × 2 of the T3 communication pipe welded on both sides of the arc-shaped flat tube and bottom arc flat tube 40 milli