论文部分内容阅读
水泥胶砂强度检验方法(ISO法)标准号为GB/T17671—1999中规定了两种检测水泥胶砂强度的方法,一种是规定的方法即振实法；另一种为代用法即振动法。振实法是采用振实台对水泥胶砂进行振实成形,振实台的制作、安装应符合JC/T682的要求；振动法是采用振动台对水泥胶砂进行振实成型,振动台的全波振幅为0．75mm±0．02mm,频率为2800∽3000次/ min,它的制造应符合JC/7723的有关要求。振动台的验收要按照GB/ T17671—1999中第11．7所规定的要求进行。实际中用振动法最后所得的28天抗压强度与ISO679规定方法所得强度之差在5％以内为合格。
Cement mortar strength test method (ISO method) Standard No. GB / T17671-1999 provides two methods for testing the strength of cement mortar, one is the prescribed method that vibration method; the other is the alternative method that vibration law. The method of vibrating is to use vibrating table to make the cement mortar, and the production and installation of the cement mortar should meet the requirements of JC / T682. The vibrating method is to vibrate the cement mortar with a vibrating table Full wave amplitude of 0.75mm ± 0.02mm, frequency of 2800 ∽ 3000 times / min, its manufacture should be consistent with the relevant requirements of JC / 7723. Shaking Taiwan's acceptance in accordance with GB / T17671-1999 in 11.7 requirements. In practice, the difference between the 28-day compressive strength obtained by the vibration method and the strength obtained by the method specified in ISO679 is within 5%.