论文部分内容阅读
GSM手机属于高科技精密产品,拆卸与重装都比较复杂,一般是采用专用工具,并按一定的方法与步骤进行拆卸与重装。否则,容易出现拆不开机子或是把机壳、液晶屏甚至电路板拆坏的情况。为了方便读者了解常见GSM手机的拆卸与重装,这里作一简介。 需要说明的是,拆卸与重装必须按一定的方法与步骤进行;操作时最好配戴防静电手套(42-8038A59)、接地线(66-80387A989)、防静电垫(66-80387A959)以免因静电而造成手机内部电路的损坏;拆卸前应先取下电池(电板)、SIM卡后再操作。
GSM mobile phones are high-tech precision products, disassembly and reloading are more complex, usually using special tools, and according to certain methods and steps for demolition and reloading. Otherwise, it is easy to disassemble or open the case, the LCD screen and even the circuit board is broken. In order to facilitate the reader to understand the disassembly and reloading of common GSM handsets, make an introduction here. It should be noted that, disassembly and reassembly must be carried out according to certain methods and procedures; operation is best to wear anti-static gloves (42-8038A59), ground wire (66-80387A989), anti-static mat (66-80387A959) Due to static electricity caused by the phone’s internal circuit damage; removal should remove the battery (power board), SIM card and then operate.