【摘 要】
：
As for the leaching-resistant zinc residues, the silver leaching rate can be over 98% through the processof pressurized preoxidation and thiourea leaching. Comp
【机 构】
：
Department of Environmental Science and Engineering
论文部分内容阅读
As for the leaching-resistant zinc residues, the silver leaching rate can be over 98% through the processof pressurized preoxidation and thiourea leaching. Compared with the method of extracting the silver directly fromthe leaching-resistant zinc residues, the silver leaching rate is greatly improved. The optimum preoxidation condi-tions are: particle size range 40 - 60 μm, oxygen partial pressure 106 Pa, temperature 80 - 90 ℃, pH= 1.0, andleaching time 5 h. After pretreatment, the time of thiourea leaching silver is shortened to 1.5 h, and the thioureaconsumption is reduced greatly. The oxidation mechanism and the thiourea leaching kinetics were also explored.
其他文献
职业技术院校人才培养的目标是"会做人"、 "能做事".而现如今大家更多看到的是学生能力水平上与社会要求的差距,很少看到学生在品行上与社会要求上的差距.但是单纯能力的发展
A sedimentation method is proposed to fabricate functionally graded materials (FGMs) with the continuous andsmooth variations of composition. The relations betw
A definition of non-column volume ratio (NCVR) is brought forward by the authors. It is influenced greatly by the slendernessratio of the cylindrical billet and
A three-dimensional model was developed to investigate the influence of various hot filaments parameters on substrate temper-ature fields that significantly aff
The effects of quenched-in crystallites on the fracture of bulk amorphous alloys under cyclic loading condition wereinvestigated in this paper. For the fully am
在20世纪90年代末成功实施巴昆库区移民工程之后,目前,马来西亚沙捞越水利公司已经制订了一项监测和拯救库区野生动物和重要植物物种的重大计划。在2009年第3季度水库开始蓄
The atomic scale computer simulation for initial precipitation mechanism of Ni75Al6V19 alloy was carried out for the first time by employing the microscopic dif
Two materials, pure Fe and pure Al, were nitrided in a pulse plasma nitriding facility. The nitrogen profiles in surface layers and the surface phase structures
The variation of S content during VIM refining Ni-base superalloy using CaO crucible was stud[ed. It was foundthat the desulphurization process could not be car
Plasma ion implantation, an alternative to conventional beam-line ion implantation, is a sheath-acceleration ionbombardment technique and the initial sheath is