Fe-based powder with a composition of Fe_(42.87)Cr_(15.98)Mo_(16.33)C_(15.94)B_(8.88)(at.%)was used to fabricate coatings by high-velocity oxygen fuel spraying.
The precipitation behavior of FeTiP in interstitial free high strength(IFHS)steels has been studied by using a transmission electron microscope(TEM).The results
Rolling contact fatigue(RCF)properties of SAE 8620 steel after case carburizing have been investigated under two contact stresses of 4.0and 5.5GPa.Results show
The effect of adding 0.5mass% Cu on ductility and magnetic properties of Fe-6.5Si(mass%)alloy was investigated.The alloys with and without 0.5mass% Cu addition
The inhibition effect of lignin sulfonate against corrosion for mild steel in acidic solution has been examined by means of FTIR(fourier transform infrared spec
Effects ofγ-irradiation and deformation temperature(T)on the tensile properties of Pb-2mass% Sb alloys were studied.The samples were annealed at 458 Kfor 2hin
Copper enrichment behavior in continuously cast slab induced by scale formation during continuous cooling was experimentally investigated,and the effects of ini
Cross-sectional ovalization of thin-walled circular steel tube because of large plastic bending,also known as the Brazier effect,usually occurs during the initi
Mathematical models for burden descending process have been applied to obtain whole burden structures in blast furnace,whereas the accuracy of those burden desc