Cyclil Oxidation Behaviors of MoSi2 with Different Relative Density

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:wenjie033
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The influence of different relative density on the cyclic oxidation behaviors of MoSi2 at 1 273 K were studied. "Pesting" was not found in all MoSi2 materials after being oxidized for 480 h. All samples exhibited continuous mass gain during the oxidation process. The mass gains of MoSi2 with the lowest relative density (78.6%) and the highest relative density (94.8%) are increased by 8.15 mg·cm2 and 3.48 mg·cm-2, respectively. The surface of the material with lower relative density formed a loose, porous and discontinuous oxidation scale, which accelerated oxygen diffusion and aggravated the oxidation process. However, a dense scale in the material with higher relative density is formed, which acts a diffusion barrier to the oxygen atoms penetrating into the matrix. The high temperature oxidation resistance of MoSi2 can be improved by increasing its relative density.
其他文献
对于重型钢结构厂房的设计,结构及构件的性能指标将采用现行普通钢结构设计规范与轻型钢结构规程相结合的方法。本文根据所设计工程的特性,包括刚架柱、刚架梁内力分布、屈曲后
随着经济发展以及人们生活的日益丰富,电能作为工业生产的重要能源和动力,不仅供配方式的环保经济利于掌控和调节,也方便形成运行与使用过程的自动化。所以,电能在现代生产和生活
该文介绍ISO9000质量管理体系标准与GB/T19580卓越绩效评价准则之间的异同,阐述推行了ISO9000标准的企业如何通过贯彻卓越绩效评价准则促使企业持续发展。 This paper intro
直流稳压电源是电子技术常用的设备之一,广泛的应用于教学、科研等领域。直流稳压电源的设计,是根据稳压电源的输出电流Io、输出纹波电压?Uop-p等性能指标要求,确定出变压器、集
“十二五”期间,“区域限批”将成悬在地方政府头上的一把利剑。无论是水源保护区还是重点流域湖泊,无论是土壤中的重金属污染还是陆地上的危险废物污染,甚至包括空气中的二氧化
Plastic pipes reinforced by cross helically wound steel wires (PSP), which have exhibited excellent mechanical performance, consist of inner polyethylene (PE) l
The selective leaching and recovery of zinc in a zinciferous sediment from a synthetic wastewater treatment was investigated. The main composition of the sedime
Diffusion of pure H2,CO,N2,O2and CH4 gases through nanoporous carbon membrane is investigated by carrying out non-equilibrium molecular dynamics(NEMD)simulation
The coexistent phenomenon of deformed and transformed adiabatic shear bands(ASBs) of ductile metal was analyzed using the JOHNSON-COOK model and gradient-depend
The influence of processing parameters on the microstructure and shape memory effect of Cu-26.1Zn-4.8Al alloy was investigated. The treated specimens were chara