论文部分内容阅读
辽宁省辽中县航辽电厂有2台沸腾制硫酸废热锅炉,经常因故障停炉。如果把沸腾炉红渣排出后冷炉后再进行泄漏处理,则处理时间长,而且浪费能源多,给企业造成较大的经济损失。下面介绍几种锅炉泄漏热态处理的方法。1锅炉及管道泄漏热态处理的简易方法1.1锅炉某部位泄漏量小的处理方法先将锅炉压力降至零,不排渣,不放水,然后在有泄漏的部位,循环系统加强循环进行冷却,锅炉其他水循环系统维持不变。然后用尖嘴锤从漏点四周向中间击打,使漏点逐渐减少最后甚至把漏点堵死。然后进行施焊。
Liaozhong County, Liaoning Province Hang Liao Power Plant has 2 boiling sulfuric acid waste heat boiler, often shut down due to failure. If the boiling furnace slag discharged after the cold furnace and then leak treatment, the processing time is long, and a waste of energy, resulting in greater economic losses to the enterprise. Here are some ways to deal with the hot boiler leak treatment. A simple method of thermal treatment of boilers and pipe leaks 1.1 A small part of the boiler leakage treatment method First boiler pressure was reduced to zero, no slag, no water, and then leaks in the area, the circulation system to strengthen the cycle of cooling, Other water circulation system of the boiler remains unchanged. Then use a beak hammer to hit the middle of the leak from the leak around, so that the leakage point and eventually reduce the leak even blocked. Then carry out welding.