论文部分内容阅读
The purpose of the study concerns the measurement of worm’s helical angle by a coordinate measurement machine in the ambient industrial environment. The novel measurement method and sampling strategy were described firstly. This method used the coordinate measurement machine to measure both of the worm gear’s left and right surfaces. The worm surface was reconstructed based on the measured data of all the sampling points. Then a middle cylinder was established to truncate the fitted worm surfaces, and the truncated spiral lines were straightened to calculate the helical angle. The measurement uncertainty of worm’s helical angle was evaluated by taking the difference of calculated helical angles along the truncated spiral lines on both the left and right side surfaces of the worm. Twenty-four measurement experiments show that the maximum measurement error of the proposed method is 0.105, and the measurement error ratios are all less than 3.5%. The result means that the measurement method can realize the precision measurement of worm’s helical angle and can be employed in the generally industrial application.
The purpose of the study concerns the measurement of worm’s helical angle by a coordinate measurement machine in the ambient industrial environment. This method used the coordinate measurement machine to measure both of the worm gear’s left and right surfaces. The worm surface was reconstructed based on the measured data of all the sampling points. Then a middle cylinder was established to truncate the fitted worm surfaces, and the truncated spiral lines were straightened to calculate the helical angle. helical angle was evaluated by taking the difference of calculated helical angles along the truncated spiral lines on both the left and right side surfaces of the worm. Twenty-four measurement experiments show that the maximum measurement error of the proposed method is 0.105, and the measurement error rates are all less than 3.5%. The result means that the measurement metho d can realize the precision measurement of worm’s helical angle and can be employed in the generally industrial application.