在用紫外线强度计检测紫外线辐照度值时,为便于迅速放置强度计探头并保持其与紫外线灯管的规定距离,以免人员经常去看距离是否合适而眼(尽管戴防护镜)受紫外线伤害,特制作了检测工具钩(附图)。制作时,取114cm 细长铝条1根,铝铆钉2只,0.1cm 厚铝板1块(9.2cm×7.3cm)。将铝条上端3cm 处弯成圆弧挂钩,下端5cm 处弯成与挂 UV intensity meter in the detection of UV irradiance value, in order to facilitate the rapid placement of the intensity meter probe and maintain its distance from the UV lamp, so as to avoid personnel often to see the distance is appropriate and the eyes (though wearing protective glasses) by UV damage , Made a special test tool hook (with photos). Production, take a 114cm elongated aluminum strip, aluminum rivets 2, 0.1cm thick aluminum plate (9.2cm × 7.3cm). The top of the aluminum strip 3cm bend arc hook, the lower end of 5cm bend and hang