(一)前言树脂型人造大理石近来不太受欢迎,这主要是因为技术和成本上的原因。就技术原因来说,人造大理石易于翘曲变形,这主要是由生产大理石用的树脂所固有的固化收缩造成的。虽然可以用重压静停固化的方法避免之,但在使用中随着环境温度的剧变仍然会产生翘曲变形,如果粘贴不好,还会脱落。因此用静压的 (I) Introduction Resin-type artificial marble has recently become less popular, mainly because of technical and cost reasons. For technical reasons, artificial marble tends to warp and deform, which is mainly caused by the curing shrinkage inherent to the resin used to produce marble. Although it can be avoided by heavy pressure static stopping and curing method, warping deformation will still occur with the drastic change of the ambient temperature during use, and if it is not adhered well, it will fall off. So with static pressure