1.原拆装方法的缺点推土机松土器的托架与后桥箱连为一体,为了避免托架轴孔磨损,松土器托架轴孔内设置了轴套。由于受到托架轴孔位置的影响,该轴套难以使用压力机进行压装,全靠操作者使用大锤敲击滑块的方式进行拆装,这样就造成轴套拆装工作效率低、劳动强度大,且存在安全隐患。为此,我们制作了松土器托架轴套拆装工具。2.拆装工具结构托架轴套拆装工具的设计思路是:有效利 1. Disadvantages of the original method of disassembly bulldozers ripper brackets and rear axle box as a whole, in order to avoid bracket shaft hole wear, ripcord bracket shaft hole set a sleeve. Due to the position of the shaft hole of the bracket, the sleeve is difficult to be press-fitted by a press, and the whole sleeve is disassembled and assembled by the sledge hammer by striking the slider by the operator. As a result, the disassembly and assembly work of the sleeve is inefficient and laborious Strong, and there are potential safety problems. To this end, we made ripper bracket sleeve disassembly tools. 2. Disassembly tool structure Bracket disassembly tool design ideas are: effective and effective