【摘 要】
：
High-power pulsed lasers provide an ingenious method for launching metal foils to generate high-speed flyers for high-pressure loading in material science or aerospace engineering.At high-temperature and high-pressure laser-induced conditions,the dynamic
【机 构】
：
State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing 100
论文部分内容阅读
High-power pulsed lasers provide an ingenious method for launching metal foils to generate high-speed flyers for high-pressure loading in material science or aerospace engineering.At high-temperature and high-pressure laser-induced conditions,the dynamic response of the metals and the mechanism of flyer formation remain unclear.In this study,the overall process of the laser-driven aluminum flyer,including laser ablation,rupture of metal foil,and the generation of the flyer was investigated by molecular dynamics combined with the two-temperature model.It was found that under high laser fluence (over 1.3 J/cm2 with 200-fs laser pulse duration),the laser induced a shock wave with a peak pressure higher than 25 GPa,which led to shear bands expanding from the edge of the laser ablation zone in the foil.Compared with the cases of low laser fluence less than 0.5 J/cm2,the shear band induced by high laser fluence promotes the rupture of the foil and results in a high-speed flyer (＞ 1 km/s) with better flatness and integrity.In addition,the shock wavefront was found to be accompanied by aluminum crystal phase transformation from face-centered cubic (FCC) to body-centered cubic structure.The crystal structure reverts with the decrease of pressure,therefore the intemal structure of the generated flyer is pure of FCC.The results of this study provide a better understanding of the laser-induced shock effect on the foil rupture and flyer quality and forward the development of the laser-driven flyer.
其他文献
This paper presents a new hyperbolic-type memristor model,whose frequency-dependent pinched hysteresis loops and equivalent circuit are tested by numerical simulations and analog integrated operational amplifier circuits.Based on the hyperbolic-type memri
Based on the fact that the electronic throttle angle effect performs well in the traditional car following model,this paper attempts to introduce the electronic throttle angle into the smart driver model (SDM) as an acceleration feedback control term,and
With the rapid development of communication technology,optical fiber communication has become a key research area in communications.When there are two signals in the optical fiber,the transmission of them can be abstracted as a high-order coupled nonlinea
A new design of staggered array semi-packed micro gas chromatographic column was presented based on the micro electromechanical system (MEMS) technology.It was a sensor for gas sample analysis.The internal velocity fields of ten types of semi-packed micro
Linear and nonlinear dust acoustic (DA) waves have been investigated in an opposite polarity dusty plasma comprising negatively and positively charged dust grains,Maxwellian electrons and ions,including the generalized polarization force effect.The proper
A new type of x-ray lens composed of multi-square polycapillary slices (ASPXRL) used in focusing parallel x-ray beam was presented in this paper.Compared with conventional x-ray polycapillary lens,ASPXRL can provide smaller and brighter focus.The effects
A scheme for instantaneous frequency measurement (IFM) using two parallel I/Q modulators based on optical power monitoring is proposed.The amplitude comparison function (ACF) can be constructed to establish the relationship between the frequency of radio
We investigate the dynamic event-triggered state estimation for uncertain complex networks with hybrid delays suf-feting from both deception attacks and denial-of-service attacks.Firstly,the effects of time-varying delays and finite-distributed delays are
Systematic calculations and assessments are performed for the magnetic dipole (M1) transition energies and rates between the 2F50/2,7/2 levels in the ground configuration 4d104f along the Ag-like isoelectronic sequence with 62 ≤ Z ≤94 based on the second-
This paper introduces a new approach for the determination of the source region of beat wave (BW) modulation.This type of modulation is achieved by transmitting high-frequency (HF) continuous waves with a frequency difference f,where f is the frequency of