Photoelectron time-resolved spectra of silver halide microcrystal adsorbed with spectral sensitizing

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:hezefgj
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Microwave absorption and dielectric spectral detection technology with high time resolution (1 ns) is used for contactless measurement of electron property in solid materials. In this paper, the free photoelectron time-resolved spectra of cubic AgCl emulsion sensitized by green-sensitizing dye are measured by dielectric spectral equipment. The samples are exposed to 35-ps short pulse laser at 355 and 532 nm, respectively. The results show that for the same sensitized sample, the free photoelectron lifetime are 43.1 and 5.8 ns, respectively. And for the same wavelength, the lifetime of sensitized emulsion is shorter than that of pure emulsion. It is thus proved that the adsorption of dyes to silver halide microcrystals increases the Ag_(i) concentration.
其他文献
期刊
正弦结构光场普遍应用于精密光学的三维测量,其正弦性直接或间接影响三维测量的精度。根据正弦条纹的周期性和对称性等几何特征,以计算机产生的标准正弦条纹单个周期作为编码对象,提出一种“S”型路径误差扩散的二元编码方法。整个正弦结构光模板通过周期性复制编码单元来实现,再通过高分辨率光刻技术加工制作在镀铬玻璃基板表面上。模板调制照明光源后,表征二元编码特征的高频信息直接被投影光学系统滤波,而表征正弦条纹信息的低频信息得以保留,从而实现正弦结构光场。最后建立光学系统的光学传递特性模型,对其固有的低通滤波机制进行解释。
In-line synchronous modulation as a way of mitigating the signal quality degradation induced by polarization mode dispersion (PMD) was experimentally studied using 10-Gb/s return to zero signal. Bit error rate of the degraded signal and the synchronously
二氧化钛薄膜材料具有较好的光致催化和亲水特性,但其对可见光低的利用率极大地限制了应用。通过非金属掺杂可以有效提高其光催化性能。采用射频磁控溅射法,以Ar/N2为工作气体,在石英衬底上制备出了掺氮TiO2纳米薄膜,在氮气中经不同温度退火处理,用X射线衍射法(XRD)、X射线电子能谱线(XPS)、扫描电镜(SEM)和紫外可见(UV-vis)等方法对薄膜的结构、掺杂情况、表面特性和光吸收性能进行了分析。XRD结果显示在退火600 ℃下薄膜为锐钛矿结构;XPS分析表明氮原子已成功掺入TiO<
A high-performance transportable fountain clock is attractive for use in laboratories with high-precision time-frequency measurement requirements. This Letter reports the improvement of the stability of a transportable rubidium-87 fountain clock because o
We report here a single-pass 1.56 μm fiber gas Raman laser in a deuterium-filled hollow-core fiber and a 2.86 μm cascade fiber gas Raman laser with methane in the second stage. The maximum output powers at 1.56 and 2.86 μm are 27 and 8.5 mW with Raman con
对通常的玻璃壳连续氩离子激光器采用维弧激励二步法,可以获得寿命长、效率高的脉冲氩离子激光。磁场是脉冲氩离子激光提高功率输出的重要条件。脉冲氩离子激光用于液面法声全息提高了动态声全息的成象质量。
期刊
期刊
根据CO2 激光束加热材料的实际情况,建立了连续激光辐照材料的数学模型,并进行实验验证。结合实际的边界条件,采用微积分的数学处理方法推导出切割深度与激光参数的解析表达式,讨论了激光参数等因素对切割深度的影响。并且设计实验以验证理论模型,用Matlab 软件绘制各参数的关系图。结果表明:材料的切割深度受激光两个参数影响最大,激光功率与激光束移动速度。理论分析和试验结果表明切割深度随着切割速度的减小而增加,随着激光功率的增加而增大,并根据实验数据小幅修改了理论模型,该模型可对激光切割包装材料时在参数选择方面做
期刊