【摘 要】
：
The plastification modification of poly(vinyl chloride)(PVC)with the long-chain linear polyester(LP)synthesized by linear dodecanedioic acid(DC12)or tetradecane
【机 构】
：
School of Materials Science and Engineering,Tongji University,Shanghai 200092,China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The plastification modification of poly(vinyl chloride)(PVC)with the long-chain linear polyester(LP)synthesized by linear dodecanedioic acid(DC12)or tetradecanedioic acid(DC 14)with different diols is investigated.The processing characteristics,mechanical properties and extraction property of the PVC/LP blends in different solvents(xylene,cyclohexane,ethanol)were also studied in detail.All results were compared with that of the PVC plasticized with dioctyl phthalate(DOP).The results show that the molecular weight,molecular structure and loading of LP greatly influence the mechanical properties of the PVC/LP blends.The processability and the mechanical properties of PVC plasticized by LP are comparable to those of the corresponding PVC/DOP blends.However,the PVC/LP blends posses much better migration resistance property than the corresponding PVC/DOP blends,which makes the long-chain linear polyester become a very good plasticizer candidate for PVC industry.
其他文献
目的介绍用趾腓侧皮瓣修饰第二足趾移植再造拇指的方法.方法利用第一跖背动脉、第一跖底动脉与趾底固有动脉之间在趾蹼处相互吻合的特点,在切取第二足趾的同时携带趾腓侧皮
随着冬季严寒天气的来临,许多市民开始争先恐后购买取暖产品,取暖产品受到市民的极大青睐,箱式电暖脚器更是民众所好,但是在购买热情高涨的背后却隐藏着市民对取暖器安全性的
目的介绍拇指桡侧逆行筋膜皮瓣修复拇指软组织缺损的手术方法.方法 1998年8月至1999年12月,对7例患者用拇指桡侧逆行筋膜皮瓣,分别修复拇指指腹、背侧及拇桡侧软组织缺损.皮瓣设计在拇指桡侧,以指侧正中线为轴线,其蒂部转折点在软组织缺损区以近0.5 cm ～ 1.0 cm处.皮瓣面积最大4.3 cm × 3.0 cm,最小2.5 cm × 1.5 cm. 结果 7例的皮瓣全部成活,术后随访5 ～
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生、测量监控等方面人手,介绍了S226海滨大桥
传统的导辊结构长期处于板坯温度差的交替变化场所,其轴承座、轴承及辊套极易出现无定向游动,从而加大了轴承与辊套的摩擦频率和轴承卡死破裂几率;针对这一现象提出了1种新的
在经典的走滑位移公式的基础上进行改进,引入断层倾角信息,使其反映了走滑断层倾角对地表形变的影响。由于断层倾角的存在使得震间位移曲线的中心是以断层面闭锁-滑动分界在地表的投影为中心,并且此处形变变化最大;公式中的倾角项表示拟合的断层倾角,体现了断层出露地表处与断层闭锁-滑动分界的整体偏移,其值往往小于近地表倾角测量值。以改进的公式作为断层剖面分析的拟合公式,应用于汶川地震前后川滇块体东边界主要走滑断
设计了应用于无线传感网络SoC解决方案的10位150 kS/s逐次逼近A/D转换器。通过失调消除技术、合理的时序控制和版图设计,实现了电路的高精度和低功耗。设计的A/D转换器积分非
In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process,the influence o