论文部分内容阅读
旧195柴油机使用年久,各部产生自然磨损,但只要润滑系统正常,便可改制打气机。具体做法如下: 1.将柴油机高压泵、油管、油箱、水箱拆除(此柴油机最好选用XX195型,因其主轴瓦是一边带轴承的)。 2.拿掉配气用的排气门推杆,让排气门形成永久性封闭。 3.卸下喷油器总成,拆掉喷油嘴,将调压顶针换成直径为5～6毫米的钢球。 4.将调压螺母与管接头相连,接至储气筒
Old 195 diesel engine used for a long time, the Ministry of natural wear and tear, but as long as the lubrication system is normal, you can transform the machine. Specific practices are as follows: 1. The high-pressure diesel pumps, tubing, fuel tank, water tank removed (the best choice for diesel engine type XX19, because of its main bearing is bearing side). 2. Remove the exhaust valve with a valve for the exhaust valve to form a permanent closure. 3. Remove the injector assembly, remove the nozzle, the pressure regulator thimble diameter of 5 to 6 mm ball. 4. Connect the pressure regulating nut to the pipe joint and connect to the air reservoir