1 圆盘剪机组的现状我厂圆盘剪机组是剪切热轧薄板的第一道工序,其工艺流程是先把待剪的成垛薄板吊放在前升降台上,送入九辊矫直机,然后由前输送链把已矫直的薄板送进圆盘剪进行板边自动剪切,板的宽度尺寸由圆盘剪确定。剪完板边的板由剪后输送链送入侧刀剪进行板头剪切,以保证成品板的长度尺寸。目前,该剪机组只适应剪 The current situation of a disc shears group Our disc shears group is the first process of shearing hot-rolled sheet, the process is first to be cut into a stack of sheets hanging on the front lifting platform, into the nine roller straightening Straight machine, and then by the front conveyor chain to the straightened sheet into the disc shears for automatic cutting edge, the width of the plate determined by the disc shears. Cut the edge of the board by cutting after the conveyor chain into the side of the scissors to cut the board to ensure the finished board length size. At present, the shear unit only adapted to shear