Hertel已开发出一种用于模具加工的新型可转位立铣刀,其品种有长、短切削刃槽铣刀,单级和多级槽铣刀,倒角铣刀和球头铣刀。为了达到较高的进给速度,切宽槽的多级或短梯铣刀的最大切深以5.5或8.5mm为宜,其对应的短刃刀具的直径为12、16、20、32和40mm(刀片:CCGX 060204或CCGX090308)’。对于长刃类刀具,直径为25、32和40mm,最大切深可达15mm。 Hertel has developed a new indexable end mill for tooling that includes long and short cut slotters, single and multistage slot milling cutters, bevel cutters and ball end mills. In order to achieve a higher feed rate, cut wide slot multi-stage or short cutters maximum cutting depth of 5.5 or 8.5mm is appropriate, the corresponding short-edge cutter diameter of 12,16,20,32 and 40mm (Blade: CCGX 060204 or CCGX090308) ’. For long edge type tools, diameter 25,32 and 40mm, the maximum depth of cut up to 15mm.