论文部分内容阅读
Instantaneous Creep in Face-centered Cubic Metals at Ultra-low Strain Rates by a High-resolution Str
【机 构】
：
School of Mechanical Engineering, Tianjin University of Technology, Tianjin 300191, China;Department
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2013年6期
其他文献
Preparative Optimization of Cellulose Microspheres Applied as Supports for High-Performance Liquid C
Hot compression tests of low carbon steel were carried out on Gleeble-3500 system in the temperature range from 750 to 900 ℃and in the strain rate range from 0.001 to 1.0 s-1, and the associated microstructural evolution was studied by observations with a
Copper-nickel nanoparticle was directly prepared by flow-levitation method (FL) and sintered by vacuum sintering of powder (VSP) method. Several characterizations, such as transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray d
Effect of Mg-Film Thickness on the Formation of Semiconductor Mg2Si Films Prepared by Resistive Ther
Mg films of various thicknesses were deposited on Si(111) substrates at room temperature by resistive thermal evaporation method, and then the Mg/Si samples were annealed at 40℃for 4 h. The effects of Mg film thickness on the formation and structure of Mg
Immobilization of RGD Peptide onto the Surface of Apatite-Wollastonite Ceramic for Enhanced Osteobla
The arginine-glycine-aspartic (RGD) acid peptide was grafted to the surface of apatite-wollastonite (AW) ceramic in an effort to improve its cell adhesion, proliferation and osteoinduction. RGD peptide was covalently immobilized onto the surface of AW cer