A versatile platform for single-molecule enzymology of restriction endonuclease

来源 :JournalofInnovativeOpticalHealthSciences | 被引量 : 0次 | 上传用户:acecar
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Enzymes are the major players for many biological processes. Fundamental studies of the enzymatic activity at the single-molecule level provides important information that is otherwise inaccessible at the ensemble level. Yet, these single-molecule experiments are technically difficult and generally require complicated experimental design. Here, we develop a Holliday junction (HJ)-based platform to study the activity of restriction endonucleases at the single-molecule level using single-molecule FRET (sm-FRET). We show that the intrinsic dynamics of HJ can be used as the reporter for both the enzyme-binding and the substrate-release events. Thanks to the multiple-arms structure of HJ, the fluorophore-labeled arms can be different from the surface anchoring arm and the substrate arm. Therefore, it is possible to independently change the substrate arm to study different enzymes with similar functions. Such a design is extremely useful for the systematic study of enzymes from the same family or enzymes bearing different pathologic mutations. Moreover, this method can be easily extended to study other types of DNA-binding enzymes without too much modification of the design. We anticipate it can find broad applications in single-molecule enzymology.
其他文献
Anisotropic dewetting polydimethylsiloxane (PDMS) surfaces, which consist of groove-like micro/nanostructures (so-called hierarchical structures), are fabricated using an ultrashort pulsed laser. The contact angles (CAs) are measured parallel to the micro
本文报导一种新型偏振无关光环行器的设计及实验结果。器件由偏振分离器、偏振组合器、法拉弟旋转器及半波片组成。对1.37微米不同偏振方向入射光,器件的插入损耗为2.8分贝,隔离为18~35分贝。
期刊
为了提高材料表面的耐磨性,实现材料的强韧结合,采用激光热流密度均匀分布的二维离散式5×5点阵光斑,对蠕墨铸铁材料的激光相变硬化过程进行数值模拟,通过改变激光功率和激光加载时间,分析了硬化过程中温度场和硬化层的变化。结果表明:基于光束离散的激光相变硬化温度场分布形态与点阵光斑的空间分布相对应,在激光加载结束时,每个小光斑中心点的温度同时达到峰值,整个光斑中心点的温度因各光斑温度场的叠加而达到最高,且沿着各光斑中心点的温度分布呈波浪形;在截面上随着深度增加,温度逐渐降低,材料的整体温度随着激光功率的增大和激光
提出了一种求解共焦镀层理想导体椭球粒子对任意角度入射高斯波束散射的解析方法。利用椭球矢量波函数把入射和散射电磁场展开,待求的展开系数由适当的边界条件推出的线性方程组确定。对于理想导体和镀层理想导体椭球粒子,给出了归一化微分散射截面的数值计算结果,并讨论了其散射特性。
我相信苏联人了解我们所有的秘密,甚至包括我们今后三十年的秘密。我们是对自己人保密,如在X射线激光器方面。现在有多混乱,因有关该计划的谎言可以发表,并已经发表。有关这些问题的真实情况,这些谎言的矛盾,我不能讲。我们中的混乱由保密造成。苏联人学到新东西是可能的,但可能性不大,因为他们至少比我先进。
期刊
A new technique is developed to measure the longitudinal thermal expansion coefficient of C/C composite material at high temperature. The measuring principle and components of the apparatus are described in detail. The calculation method is derived from t
通过建立高强化柴油机气门座激光相变硬化温度场的数值模拟模型,分析了激光相变硬化过程中工艺参数对气门座温度场的影响。结果表明,随着激光功率的增大,气门座相变硬化的峰值温度升高,温度场呈拖尾的彗星状,硬化层的深度和宽度增大;随着扫描速度的增大,气门座相变硬化的峰值温度降低,温度场拖尾的彗星形状减小,硬化层的深度和宽度减小;随着光斑半径的增大,气门座相变硬化的峰值温度降低且位置发生偏移,温度场拖尾的彗星形状增大,硬化层的深度减小。
针对InGaAs短波红外成像在军事装备、安全防范和工业检测等领域中的应用,提出了一种基于FPGA技术架构的InGaAs焦平面探测器组件的设计方案.讨论了InGaAs焦平面探测器的时序驱动、TEC温控、非均匀性校正、图像增强和自动曝光等关键技术的实现方法.经试验验证,依据该方案研制出的InGaAs焦平面探测器成像组件灵敏度高、对比度好、透雾效果明显.