论文部分内容阅读
太钢初轧厂在称量辊道后的未被使用的升降挡板上,装设打印字盒,利用钢坯在辊道上输送时的冲力进行自动打印。代替人工,效果甚好。升降挡板改为打印机的具体办法是:将升降挡板的挡板改成叉形,在叉的两端安设带有槽形的横梁,此横梁能根据钢坏的规格,通过两边的丝母丝杆进行上下调整。在横梁上装设带有字头的字盒。字盒的数目根据同时要打印的钢坯根数而定,通常为二个(即同时打两根钢坯)。每个字盒所装的字号与每根钢坯所要打印的字号,一般为
TISCO initial rolling mill in the unused after the Weighing roller lifting baffle, the installation of print-type box, the use of the billet when transported on the roller to automatically print impulse. Instead of artificial, the effect is very good. Lift baffle into a printer specific approach is: the baffle lifting fork into fork-shaped, at both ends of the fork to install with a beam-shaped beam, the beam can be bad according to the specifications of steel, through both sides of the wire Female screw rod to adjust up and down. Install the word box with prefix on the beam. The number of boxes depends on the number of billet to be printed at the same time, usually two (that is, two billets at the same time). The size of each box installed and each billet to print the font size, generally