论文部分内容阅读
民用住宅工程阳台、厨房、卫生间与卧室、客厅的标高不一致,一般相差20mm左右。主体面层混凝土浇筑完毕,在施工地坪混凝土时需要对两个标高的混凝土进行浇筑。采用较普通的方法是使用塔尺和水平仪确定标高,然后打点充筋,施工地坪混凝土。随着水平标线仪的推广,在施工地坪时水平标线仪得到广泛应用。但是在施工过程中还是发现效率较低,在仔细观察施工方法以后,从塔尺入手分析解决如何提高效率。1.地坪标高杆制作方法因为需要确定两个标高,两个标高相差约为20 mm。其余的塔尺读数均不需要,理论
Civil engineering balcony, kitchen, bathroom and bedroom, living room elevation inconsistencies, the general difference of about 20mm. The main surface of the concrete pouring completed, the construction of concrete floor leveling need to be two concrete pouring. The more common method is to use the ruler and level to determine the elevation, and then filling stiffeners, the construction of concrete floor. With the promotion of the horizontal marking instrument, the horizontal marking instrument is widely used in the construction of the floor. However, during the construction process, it was still found that the efficiency was low. After carefully observing the construction method, it started to analyze how to improve the efficiency from the tower ruler. 1. Floor elevation pole production method because of the need to determine the two elevation, two elevation difference of about 20 mm. The rest of the ruler readings are not required, theory