短半轴轴承座的拆卸在拆去制动器总成后,从外面看,似乎短半轴与长半轴之间没有关联,只要用两个M12的螺钉就可将短半轴连同轴承座一起顶出来。实际上并不这样简单,当拆下后上盖后可发现,短半轴轴承座两边装有轴承,中间有一凹口,大齿轮正好处在这一凹口里与短半轴上小齿轮相啮合。如果预先不拆去大齿轮即 After the removal of the short half-shaft bearing seat assembly removed from the outside, it seems that there is no correlation between the short half-shaft and the long half-shaft, as long as the use of two M12 screws can be short shaft together with the bearing top come out. Actually not so simple, after removing the cover after the discovery, the bearing on both sides of the short half bearing, with a notch in the middle, the large gear is located in this recess and the short half-shaft pinion phase Engage. If you do not remove the gear before that is