论文部分内容阅读
采用ProCAST软件,对典型铸件端盖的铸造充型和凝固过程进行数值模拟,通过对模拟结果的分析,预测铸件的缺陷,进而提出相应的改进措施,消除因工艺设计不当出现的铸造缺陷,从而达到对工艺的进一步优化。
ProCAST software is used to simulate the process of filling and solidification of a typical casting end cap. Through the analysis of the simulation results, the defects of the castings are predicted, and the corresponding improvement measures are put forward to eliminate the casting defects caused by improper process design To achieve further optimization of the process.