论文部分内容阅读
Non-isothermal curing kinetics and thermal properties of benzoxazine-phenolic copolymers
【机 构】
：
School of Chemistry and Chemical Engineering
【出 处】
：
中南大学学报（英文版）
【发表日期】
：
2004年期
【基金项目】
：
the Key Science and Technology Item of Guangdong Province, China
其他文献
Superplastic deformation mechanism of AZ31B magnesium alloy sheet was investigated. Maximum elongation of 216%and strain rate sensitivity of 0.36 were obtained
CuOx/CeO2 catalysts were prepared by adsorption-impregnation method.CO conversion was tested over the catalysts pretreated under different conditions for prefer
Oscillating heat pipes (OHPs) are very promising cooling devices. Their heat transfer performance is affected by many factors, and the form of the relationship
Optimal Control of Oxygen Concentration in a Magnetic Czochralski Crystal Growth by Response Surface
Concepts and techniques of response surface methodology have been widely applied in many branches of engineering, especially in the chemical and manufacturing a
Improvement of surface hydrophobicity on silicone rubber modified by CF4 radio frequency capacitivel
Fibroblast Adhesion and Proliferation on a New β Type Ti-39Nb-13Ta-4.6Zr Alloy for Biomedical Applic
Cell attachment and spreading on Ti-based alloy surfaces is a major parameter in implant technology. Ti39Nb-13Ta-4.6Zr alloy is a new β type Ti alloy developed
随着广东建筑业地迅猛发展，人们越来越关注建筑工程建设中的现场施工管理工作。因为它不但关系着人的生命与财产安全以及影响着社会稳定发展，而且也是一切工作能够顺利进行的基
Silicon carbide (SiC) foams with a continuously connected open-cell structure were prepared and characterized for their mechanical performance. The apparent den
Effect of low-frequency rotary electromagnetic-field on solidification structure of continuous casti
Solidification microstructural constituent and its crystallographic morphology of permanent-mould-ca
The microstructural constituents and the crystallographic morphology of the primary intermetallic phases in permanent-mould-cast Mg-Zn-Al alloys with typical co