Vauxhall Victor新的1600及2000V形发动机气缸体的每组轴承盖,从机械加工自动线出来到气缸体装配线的装配工位,一直保持着正确的次序和位向。一组轴承盖是铸成一体的1,加工之后切开。设计满足了这样的要求,即铸件切成的5个轴承盖,在卸料、输送、清洗以及经过储存机到达装配工位的过程中都保持了它们原来的相互位置。 Vauxhall Victor Each new set of 1600 and 2000V engine block bearings is automatically machined to the assembly line of the cylinder block assembly line and maintained in the correct sequence and orientation. A group of bearing caps are cast as a whole. Cut after machining. The design fulfills the requirement that the five bearing shells cut from the castings retain their original mutual position during unloading, conveying, cleaning and storage at the assembly station.