【摘 要】
：
The droplet transfer behavior and weld characteristics have been investigated under different pressures of shielding gas in CO2 laser and metal inert/active gas (laser-MIG) hybrid welding process. The experimental results indicate that the inherent drople
【机 构】
：
StateKeyLaboratoryofAdvancedWeldingProductionTechnology,HarbinInstituteofTechnology,Harbin150001
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
The droplet transfer behavior and weld characteristics have been investigated under different pressures of shielding gas in CO2 laser and metal inert/active gas (laser-MIG) hybrid welding process. The experimental results indicate that the inherent droplet transfer frequency and stable welding range of conventional MIG arc are changed due to the interaction between CO2 laser beam and MIG arc in laser-MIG hybrid welding process, and the shielding gas pressure has a crucial effect on welding characteristics. When the pressure of shielding gas is low in comparison with MIG welding, the frequency of droplet transfer decreases, and the droplet transfer becomes unstable in laser-MIG hybrid welding. So the penetration depth decreases, which shows the characteristic of unstable hybrid welding. However, when the pressure of shielding gas increases to a critical value, the hybrid welding characteristic is changed from unstable hybrid welding to stable hybrid welding, and the frequency of droplet transfer and the penetration depth increase significantly.
其他文献
The growth parameters affecting the deposition of self-assembled InAs quantum dots (QDs) on GaAs substrate by low-pressure metal-organic chemical vapor deposition (MOCVD) are reported. The low-density InAs QDs (~5×108 cm-2) are achieved using high growth
本文报导利用4.6微米附近谱线可调倍频CO2激光辐射的差值吸收对大气中的CO浓度进行单端遥测。CO的浓度根据地形目标所反向散射的激光回波推算，目标距离达2.5公里，浓度的总误差约为±10PPb。利用在不同距离、但在同一瞄准线上的几个目标，有可能进行假距离分辨测量，并能清楚地确定汽车道上CO浓度高度集中的地点。
Motivated by the achieved high intensities of novel extreme ultraviolet (XUV) radiation sources, such as free electron lasers and laser-driven high harmonic generation beamlines, we elaborate on their perspective in inducing observable strong field effect
A robust charge-coupled device (CCD) photoelectric autocollimator for outdoor use is designed and demonstrated. The influence of outdoor conditions on the signal-to-noise ratio (SNR) and imaging quality of the measuring system is experimentally analyzed.
用线性位置探测器很容易测出沿装配线运动的零件的厚度或高度变化。测出狭长的光电探测器长度方向上一束细光束的位移，就可以进行这种一维测量。本文概述了这种测量系统的光学设计原理。
扫码移动支付存在的安全漏洞已成为电子支付安全迫切需要解决的问题。提出了一种基于三维成像技术的安全二维码系统。首先,利用集成成像技术生成三维数字水印,作为商家标识;其次,对标识进行基于身份的数字签名;再次,在菲涅耳域,利用安全二维码系统把携带有签名信息的三维数字水印,经过压缩编码后隐藏到二维码中。最后,用户扫码识别并提取出隐秘数据,同时验证签名信息,如果验证通过,计算重构并显示出三维数字水印图像,经
借助高速X射线图象变换照相机，已经直接测得X射线激光等离子体辐射。这种照相机以单帧方式运转，其曝光时间范围为5毫微秒到0.6微秒，以条纹方式运转时，条纹速度为5×109到5×102厘米/秒。条纹方式的时间分辨率的计算值大约是5微微秒。使10微微秒、1~2焦耳的激光脉冲聚焦在置于真空室中的钛靶上，得到了等离子体。记录到的X射线脉冲的半宽度变化范围为30~60微微秒。