【摘 要】
：
The application of the finite layer & triangular prism element method to the 3D ground subsidence and stress analysis caused by mining is presented. The layer elements and the triangular prism elements have been alternatively used in the numerical simulat
【机 构】
：
Research Institute of Geotechnical Engineering,Hohai University, Nanjing 210098,China;Institute of R
论文部分内容阅读
The application of the finite layer & triangular prism element method to the 3D ground subsidence and stress analysis caused by mining is presented. The layer elements and the triangular prism elements have been alternatively used in the numerical simulation system, the displacement pattern, strain matrix, elastic matrix, stiffness matrix, load matrix and the stress matrix of the layer element and triangular prism element have been presented. By means of the Fortran90 programming language, a numerical simulation system based on finite layer & triangular prism element have been built up, and this system is suitable for subsidence prediction and stress analysis of all mining condition and mining methods. Comparing with the infinite element method, this approach dramatically reduces the size of the set of equations that need to be solved, and greatly reduces the amount of data preparation required. It not only saves the internal storage, and the computation time, but also decreases the cost.
其他文献
Divided the gob gas in different types according to falling structure and spatial patterns of gob of the fully mechanized caving mining and analyzed its main form of harm.This passage preliminarily studied the law of unusual gush of gob gas of the fully m
The variation of the stress in the bolted surrounding rocks structure of the roadway driven along goaf in a fully mechanized top-coal caving face with moderate stable conditions are studied by using numerical calculation. The essential deformation charact
For circumstances of medium-embedding depth and medium-hard surroundings in Jining No.2 Colliery, Yanzhou Group, by using software RFPA2D to simulate the process of overburden fracture, studied the overburden separation which was caused by working face ex
The technique of data mining was provided to predict gas disaster in view of thecharacteristics of coal mine gas disaster and feature knowledge based on gas disaster.The rough set theory was used to establish data mining model of gas disaster prediction,a
Geological structure and gas expansion when gas pressure was released can affect the distribution of infrared radiation energy or temperature at coal-rock surface. From this, the foundation of roadway infrared surveying technical was formed. According to
For a safe extracting of the mine resource of the razor-thin capping rock, a study of waterproof, sand prevention, roof-fall prevention must be made. As a result, its necessary to master the engineering feature of weathering zone of bedrock. According to
The damage constitutive relation of entire rock failure process was established using the theory of representative volume element obeying the Iognormal distribution law,and the integrated damages constitutive model of rock under triaxial compression was e
Based on safety management appraisal theory, the decision system was divided into 5 function menu module, including system control module, mining coal and the tunneling working surface security evaluation module, the entire ore safety production condition
It is showed in practice that the support load and its fluctuation is large, the periodic weighting is obvious and can be divided into two kinds, the large and small pressure, sometimes the behavior of the large pressure is very violent in hard thick seam
The distributions of strata rock temperature around a driving head with auxiliary ventilation were analyzed theoretically based on a program which was developed by the authors to predict the thermal environmental conditions in a development heading with f