Connection plays an important role in structural components and end jointing is one of the most common connections in structural applications.This study was designed to investigate some mechanical properties (MOE and MOR) of solid wood samples manufactured from poplar (Populus nigra),joined together through end jointing.As well,we studied combinations of lumber manufactured from 10-mm veneer,using a polyvinyl acetate adhesive.The results show that non-jointed lumber (control samples) have better bending properties (MOE and MOR) than jointed specimens and lumber made from laminated layers.On the whole,side-byside joints have a negative effect on the MOR and MOE of laminated products,which is more pronounced in the MOR.By increasing the number of joints,the properties of combination of three-ply,i.e.,bending strength and modulus of elasticity,decreased. Connection plays an important role in structural components and end jointing is one of the most common connections in structural applications. This study was designed to investigate some mechanical properties (MOE and MOR) of solid wood samples manufactured from poplar (Populus nigra), joined together through end jointing. As well, we studied combinations of lumber manufactured from 10-mm veneer, using a polyvinyl acetate adhesive. The results show that non-jointed lumber (control samples) have better bending properties (MOE and MOR) than joinedted specimens and lumber made from laminated layers. On the whole, side-byside joints have a negative effect on the MOR and MOE of laminated products, which is more pronounced in the MOR.By increasing the number of joints, the properties of combination of three-ply , ie, bending strength and modulus of elasticity, decreased.