Chinese Expert Consensus on Perioperative Medication in Laser Corneal Refractive Surgeries (2019)

来源 :中国医学科学杂志(英文版) | 被引量 : 0次 | 上传用户:gcj820305
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Laser ceal refractive surgery has become an important treatment to correct ametropia in recent years.Rational medication in the perioperative period is essential to ensure the success of the surgery and to reduce complications.However,in this area there has been no consistent understanding and unified application guide across the world.Experts in Refractive Surgery Group,Ocular Microcirculation Branch of Chinese Society of Microcirculation who are specialized in keratology and optometry had initiated extensive and rigorous discussions and reached a consensus on appropriate medication before,during and after the refractive surgeries.The consensus covers a broad spectrum of commonly used ophthalmic solutions,provides recommendations of routine and enhanced medication on prevention and management of adverse reactions and complications related to the laser ceal refractive surgeries.We hope the consensus serves as a standard perioperative medication regimen for ophthalmologists,helps to ensure the safety and effectiveness of laser ceal refractive surgeries,and improves the quality and outcome of the refractive surgeries.
其他文献
随着我国经济的迅速发展,制药、化工等行业每年排放大量的高浓度有机废水,其中含硫含氮有机废水是对生物和环境造成恶劣影响的一类重污染行业废水的典型代表,如何稳定高效地去除该类废水中碳氮硫污染物质成为当前亟需解决的问题。碳氮硫共脱除(Simultaneous desulfurization and denitrification,SDD)工艺将硫酸盐还原-有机物厌氧氧化与反硝化脱硫过程耦合,可实现碳-氮
微生物燃料电池(Microbial Fuel Cell,MFC)是一种可同时净化废水并回收能源物质的新兴废水资源化技术。MFC的基本原理是利用微生物作为催化剂,以废水中的有机物为燃料,将其中的化学能转化为电能。在当前环境污染严重、能源匮乏的双重压力下,兼具去污产电功能的MFC的应用为废水处理开辟了一条崭新而宽阔的道路。本文构建了双室微生物燃料电池,考察了四种不同阴极(曝气阴极1、铁氰化钾阴极、曝气
目前,我国的热轧带钢生产技术水平与世界先进水平还存在较大的差距,同时用户对板带材的板厚精度和板形质量也提出了更高的要求。因此,对精轧过程中轧制力、轧制温度和负荷分
本文利用室温拉伸、显微硬度测试、金相、电子显微分析和织构分析等方法研究了铝镁、铝镁钪合金冷轧板以及铝镁钪合金热挤压型材不同稳定化退火处理条件下的组织性能,并在此基
随着钢铁行业的发展,连铸坯热装热送及“热送直轧”技术的应用程度已成为衡量钢铁生产技术水平的新指标,连铸坯热送热装具有提高生产率、降低能耗和减少铸坯氧化烧损的作用,
膨润土独有的片层结构可使得粘土/橡胶纳米复合材料具有优异的气体阻隔性。如何实现高份数粘土在丁苯橡胶的纳米级分散是一个研究热点。本文通过喷雾干燥法制备出高填充份数的粉末丁苯橡胶,并实现其工业化。同时对其工业化工艺进行探究,找出最佳工艺条件。首先探究了不同喷雾干燥方式对粉末丁苯橡胶结构性能影响。结果表明过热蒸汽干燥容易在物料表面形成蒸汽通道,有利于物料内部水分的蒸发。而热空气干燥容易在橡胶分子链中引入