【摘 要】
：
A meshless approach, called the rigid-plastic reproducing kernel particle method (RKPM),is presented for three-dimensional (3D) bulk metal forming simulation. T
【机 构】
：
National Die and Mould CAD Engineering Research Center
论文部分内容阅读
A meshless approach, called the rigid-plastic reproducing kernel particle method (RKPM),is presented for three-dimensional (3D) bulk metal forming simulation. The approach is a combination of RKPM with the flow theory of 3D rigid-plastic mechanics. For the treatments of essential boundary conditions and incompressibility constraint, the boundary singular kernel method and the modified penalty method are utilized, respectiwely. The arc-tangential friction model is employed to treat the contact conditions. The compression of rectangular blocks, a typical 3D upsetting operation, is analyzed for different friction conditions and the numerical results are compared with those obtained using commercial rigid-plastic FEM (finite element method) software Deform3D. As results show, when handling 3D plastic deformations, the proposed approach eliminates the need of expensive meshing and remeshing procedures which are unavoidable in conventional FEM and can provide results that are in good agreement with finite element predictions.
其他文献
Using numerical methodology, the flow fields between two corrugated plates with different values of the corrugation inclination angle β were simulated.The simu
In this paper, the extended projective approach, which was recently presented and successfully used in some continuous nonlinear physical systems, is generalize
The inducing effect of potassium citrate (K3cit) on simultaneous growth of calcium oxalate mono-(COM), di-(COD), and trihydrate (COT) crystals in synthetic urin
In this paper, a new polymer of polysiloxane modified polyurethane was synthesized by using H-containing silicone oil, toluene diisocyanate(TDI), 1,4-butanediol
New exact solutions are determined to the coupled mKdV equations by means of modified mapping method.
Data obtained from accelerated life testing (ALT) when there are two or more failure modes, which is commonly referred to as competing failure modes, are often
Batch experiments were conducted to investigate the adsorption of 2,4-dichlorophenol (2,4-DCP) onto microwave modified activated carbon (AC) at three different
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7
Salvianolic acid B(Sal B) is an active component of traditional Chinese medicine Salvia miltiorrhiza and is used to treat vascular diseases. To better understan
High-rise reinforced concrete buildings are in great demand in developing countries with rapid urbanization.Construction engineers are facing more and more safe