工程安全监测网络系统具有无中心控制的真正分布控制模式，使控制器点尽量靠近传感器，就像一条“传感器总线” 结构开放，具有良好互操作性 现地测控单元出现故障不会影响系统工作，现地测控单元内固化有网络通信协议 与其他自动化系统相比，通信的可靠性大大增加，测点的重新组合十分方便 本系统软件分三大块，包括前端数据采集程序、在线监控管理软件以及离线分析系统 本系统在河北省桃林口水库大坝安全监测自动化中首先得到应用，其后在湖南省蟒塘溪等地方先后得到推广应用 The engineering safety monitoring network system has a truly distributed control mode without central control, which makes the controller point as close as possible to the sensor, which is like a “sensor bus.”  The structure is open and has good interoperability  The failure of the local monitoring and control unit will not affect the system Work, in situ measurement and control unit curing network communication protocol  compared with other automated systems, communication reliability greatly increased, the point of the reassembly is very convenient  The system software is divided into three blocks, including front-end data acquisition procedures, online Monitoring and management software and offline analysis system  The system was first applied in dam safety monitoring automation of Taolinkou reservoir in Hebei Province and was successively applied in places such as Python Tong Creek in Hunan Province